WARWAG
Active member
- 1,487
- 22
- 38
Nah the 6.5 is a good diesel IF the #8 cyclinder is good.. I like the 6.2 with a Banks turbo better though. The cylinder walls on the 6.2 are thick and have no problems.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV Build... Here We Go Again...
- Thread starter devilman96
- Start date
jakwi
Member
- 68
- 0
- 6
- Location
- Colorado Springs
man as old as this thread is I figured I'd get to read through the whole build. I'm really curious how it ended up. I'd love to know what donor vehicle the seats came from.
LionsLegacy
New member
- 7
- 0
- 0
- Location
- Traverse City/ Michigan
wow. Just wow!
Yeah, I hope we get an update soon as well. Amazing build.
- 34,012
- 1,810
- 113
- Location
- GA Mountains
It has since been through another transition. The engine was pulled, freshened up and new heads installed. The 700R4 was scrapped in favor of the 4L80E and an all digital dash was installed. Only a few more bugs for Mike to work out!
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
nice build. Post up some more picts.....
LTWVARNG
Member
- 191
- 2
- 18
Make this thread go away too many ideas....so little money
1986Blazerk5
New member
- 443
- 1
- 0
- Location
- Brighton,MI
what kind of bedliner did you use?
CUCV85
Member
- 309
- 4
- 18
- Location
- central/ny
I used the Advance Auto Parts beliner "duraliner"
I prefer the Rhino Liner, sold everywhere now and still the best, just ask around...
WARWAG
Active member
- 1,487
- 22
- 38
Any more up to date pictures available?
1986Blazerk5
New member
- 443
- 1
- 0
- Location
- Brighton,MI
Any Updates on the build?
- 34,012
- 1,810
- 113
- Location
- GA Mountains
The new 4L80E fried itself to a crackly crunch. Other than that, it's pretty much done. The tranny was new but a faulty and clogged aux cooler cost the tranny and all the expensive components it's life. Again the truck has been placed on the back burner in hopes that Mr Murphy will soon die a painful death.
FireFighterHill
Banned
- 1,540
- 62
- 0
- Location
- Riyadh, Saudi Arabia
Was that the second tranny?
- 34,012
- 1,810
- 113
- Location
- GA Mountains
2nd tranny, first 4L80E. The one from Tampa is on hold right now!
FireFighterHill
Banned
- 1,540
- 62
- 0
- Location
- Riyadh, Saudi Arabia
Did Mike not flush the cooler before installing the tranny? I just had my trucks tranny rebuilt and put on a new trans cooler and bypassed the factory cooler. If I ever have to have it rebuilt again I will just replace the cooler it was only 60 bucks alot less then the cost of a rebuild.
1986Blazerk5
New member
- 443
- 1
- 0
- Location
- Brighton,MI
Where did you puy the cooler? I want to add one as well
- 34,012
- 1,810
- 113
- Location
- GA Mountains
It was a new cooler, plugged from the factory. Thats what sucks about the whole deal. Guess we need flowmeters on everything.
FireFighterHill
Banned
- 1,540
- 62
- 0
- Location
- Riyadh, Saudi Arabia
I got it from autozone. Im not sure what size would be needed for a CUCV to provide proper transmission cooling. I put this one on my 2002 Dodge Dakota Compressor Works/Transmission Oil Cooler | Transmission Oil Cooler | AutoZone.com
If you wanna go to the trouble and expense you can get a tranny cooler with shroud and fan from B&M. I believe you can also add a electronic thermostat to trip the fan off and on and run a temp gauge.
If you wanna go to the trouble and expense you can get a tranny cooler with shroud and fan from B&M. I believe you can also add a electronic thermostat to trip the fan off and on and run a temp gauge.
Last edited:
FireFighterHill
Banned
- 1,540
- 62
- 0
- Location
- Riyadh, Saudi Arabia
Did you guys try getting the manufacturer to cough up the money for the tranny? Or did they tell you to buzz off?
- 34,012
- 1,810
- 113
- Location
- GA Mountains
It got really complicated after that. I stood down and am now on deck if Mike needs anything.