Monkeyboyarmy
Well-known member
- 1,337
- 194
- 63
- Location
- Kingsville,Oh.
I guess I should have clarified that the one I purchased was not the original rather a suitable replacement. It works perfect.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV2/CUCV-II Owners, post pics and info of your truck
- Thread starter Warthog
- Start date
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Does anyone know where this plug goes? It is located next to the wiring harness for the blackout light switches. The plug is present and is not connected to anything in either of my CUCV IIs. The pink wire is short and spliced into the main light harness.
Attachments
Nico
Member
- 329
- 15
- 18
- Location
- Germany, Hamburg
.....6.5T (diesel) wiring diagram for a CUCV II (unknown source) <----- The diagram was created by warthog and shared with his kind permission, just to be correct.
Last edited:
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Fixed my post
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Got my CUCV II painted up. Rapco 383 green. The paint will significantly darken over the next coming days.
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
A by-god CLEAN garage!
That's almost a prettier sight than that sure-enough fine paint job.
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Starting to look like a military vehicle again. Waiting on the bumpers to come back from the powder coater and it will be ready for the road.
Attachments
- 10,498
- 6,631
- 113
- Location
- Camp Wood/LC, TX
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Yes, the sun and ambient colors affects the paint. I used 383 green. Here's how dark it was last night. It is even darker in the shade in natural sunlight.
Attachments
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Got the stencils on. Took longer than I expected but they turned out very nice.
Attachments
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
The bumpers are different. The CUCV II bumper is a modified version of the stock rear bumper on a Tahoe.
amgeneral72
Active member
- 487
- 124
- 43
- Location
- HOLLY SPRINGS GA
I believe he was referring to the pick up.
Im not sure if it’s the same but it sure looks like it.
Attachments
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Starting to look good. I've run out of things to do to it until the bumpers are ready.
Attachments
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Had a problem where the antenna mount I used off a CUCV I didn't have the proper angle on the body, due to the difference in body style from 1984-1999. I bought a CUCV I antenna mount from a friend and it had this special bracket on it that made it level. It is necessary if you want to use a CUCV I antenna mount on a CUCV II.
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Just got the voltage converter panel back from the metal shop. I can have more made if requested.
Attachments
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Good news, the CUCV II is back to 24V! I have attached what an original CUCV II voltage converter cover looks like in comparison to my reproduction.
Attachments
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
The reproduction looks great, a big improvement over the OEM cover.
Did you do all that bending and brake-work yourself?
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
No, I had a local metal shop make it for me.