Dash Decal

[sf38a1]

Does anyone know if this decal is available ? also there was (I think ) a dodge warranty sticker on the dash all so. The warranty sticker was all but gone , but it was a white background,with black lettering. The fasten seat belt I have seen b4 in military vehicles.

 

[porkysplace]

The black and white decal is the decal for warn locking hubs , it shows proper locking and unlocking procedure .
they used to be included with the hublocks back in the 70's and 80's. check warns website for availability.

Edit; you may want to go to e-bay and search for seller that goes by ; Left Coast Design he may have them or be able to make them. For the seat belt sticker.

 

[sf38a1]

thanks I have the warn locking decal, the black and white decal ,which i think was a dodge warranty decal was on the metal part of the dash next to the tower warning decal . I dont have a picture of it because it was in such bad shape. I will check on the seatbelt one.

 

[Super Warrantman]

I took a picture of the Chrysler Corporation Warranty decal that was on the dashboard of my M882. It was in pretty good shape. I'm not sure if that was what the original poster's question was about but if one needs to duplicate a decal my picture might serve as a base. (I don't know if anyone is currently offering a reproduction decal like this)

I don't think I've ever seen a decal about locking hubs on an M880. As far as I can remember, they were all constant 4-wheel drive and they didn't have locking hubs. The Chevys had locking hubs on the front of course, but I don't remember seeing any locking hub decals on them either - and I drove a lot of CUCVs back in the day as they say when I wore green.

I have the full size picture of the decal. Send me a PM if you want it with your e-mail address.

 

[Bob H]

The OP's truck is not a M880 series, yet is a 70's military Dodge with a Dana70 front axle.

 

[nattieleather]

I think one of the members here made a duplicate decal of the warrenty. I know I did a typing up of it in MS Word, but I think he had it actually made.

 

[Super Warrantman]

The OP's truck is not a M880 series, yet is a 70's military Dodge with a Dana70 front axle.

That would explain where the locking hub decal came from then.

 

[sf38a1]

Thanks for the help . PM sent, I found someone local that can make vinyl decals . I'll see how good they come out. I have to have something to cover the 30 holes in the dash where they mounted all the radio ,sirens and who know what all to the dash

 

[sf38a1]

Here's a couple more that i have to get remade, these's are more of a thin foil, and they where also attached on the dash