• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Data port

bear76

New member
31
0
0
The round data port under the dash, is it needed? The PO hacked all the wires under there and I'm still sorting everthing out. If it is not needed can I nix the harness for it on the other side of the firewall?

Thanks.
 

CUCVFAN

Gunner's Mate First Class
Steel Soldiers Supporter
1,177
47
48
Location
Jarrettsville, MD
It's only the diagnostic hookup. It was hacked off of my M1028A3 and never caused me a problem. I think you should be safe to lose it, harness and all.
 

ARMYMAN30YearsPlus

In Memorial
In Memorial
3,585
7
0
Location
Parkville, MD
It was for the STE-ICE system sort of like a high powered OBD II hook up. The only worry I would have is if there was a sensor shorted out by wires being grounded or fryed by connecting with + 12 or + 24 volts. I think the 20 level manual goes into the use of the system and port hook up. This might be the best place to make a search of the issue.
 

bear76

New member
31
0
0
It was hacked by the PO and I have not started it yet, just disconnected the harness under the hood. I will pull out all wires I can then tape off the rest till I get it on the road.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks