• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Delco-Remy 1111556 24v Ignition Unit

Justin7up

New member
12
17
3
Location
Bourbon MO
How is this wired? It's off a REO 331OA Firetruck deuce. It's a bit of an aberration from the norm with the fording mode, and I'm struggling.

Anyone know the name of that connection on the right?
 

Attachments

M37keppy

Member
78
51
18
Location
Eldridge, Iowa
I don’t have the parts book in front of me to look up the technical name but I just searched “M series distributor plug” for the photo. Most MV parts suppliers have them. When I said harness before, I should have said engine wiring harness.
 

G744

Well-known member
Steel Soldiers Supporter
1,724
3,884
113
Location
Hidden Valley, Az
The gold color anodized connectorss are by Bendix, not to be confused with those by Cannon. 24 volt tacticals use them everywhere.

The plug wires are incorrect, they should be shielded wires with copper-colored wire braid on them, about 1/2" in diameter. They thread into all-metal waterproof spark plugs.

Those plugs are expensive, and why mechanics try and run plain plugs & wires.
 

Justin7up

New member
12
17
3
Location
Bourbon MO
Thanks guys. I ordered one "Military Truck M151 M35 M800 Distributor Wiring Harness Connector "
Was confused because my mechanical odometer cable fit it perfectly, even though that doesn't make sense to go there, and my other REO engine has the odometer cable right under the distributor, and this Engine has no mechanical odometer hookup
 

davidb56

Well-known member
1,020
1,238
113
Location
Bonners Ferry Idaho
Thanks guys. I ordered one "Military Truck M151 M35 M800 Distributor Wiring Harness Connector "
Was confused because my mechanical odometer cable fit it perfectly, even though that doesn't make sense to go there, and my other REO engine has the odometer cable right under the distributor, and this Engine has no mechanical odometer hookup
would it be the tachometer sender? or is your tach mechanical? ( Ive never seen a gasser close up)
 

G744

Well-known member
Steel Soldiers Supporter
1,724
3,884
113
Location
Hidden Valley, Az
No tach in the early gasser M35.

Lots of commercial road rigs back then did have a cable-driven tach.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks