• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

DENTON NC Buy/Sell Thread 2022

AFGVET

Member
37
63
18
Location
Fort Bragg NC
Hello,
I need the following for my M1009:

Radiator
Before all other things I need one good condition (holds pressure)

1. Dashboard (dashboard pad) with mounting clips.

2. Body Panels (see my post "New to me M1009" for pictures)
a. Lots...

3. Weatherstripping
a. Window seals and channels refurbishing
b. Door seals

4. Seatbelt buckles (mine are al rotted out)

5.Glow Plug stuff.
a. Controller
b. I know its a bit Gucci, but a stuck glowplug puller like this one so I don't snap one off.
1648907110401.png

6. 2 Clevis/shackles

I am sure I will need more as it gets dug into.
 
Last edited:

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,810
742
113
Location
Liberty Hill, SC
Wanted:
A civilian 3.07 geared rear end for a project.
Need a set of old rubber tracks off a mini excavator or skid steer, no wider than 10in, not too concerned with length.
A dodge/chrysler 265 cid flathead

Selling
NATO slave cable $200
2 plastic wrecker spot lights $75 each
M36 and m35 canvas bed covers great shape $400 each
Military fuel nozzles for pumps and hoses 3/4 npt nos $15 each
M38a1 starter, might need rebuild $50
And other stuff
 

Oxyacetylene

Active member
Steel Soldiers Supporter
518
179
43
Location
Stoneville, NC
Wanted:
A civilian 3.07 geared rear end for a project.
Need a set of old rubber tracks off a mini excavator or skid steer, no wider than 10in, not too concerned with length.
A dodge/chrysler 265 cid flathead

Selling
NATO slave cable $200
2 plastic wrecker spot lights $75 each
M36 and m35 canvas bed covers great shape $400 each
Military fuel nozzles for pumps and hoses 3/4 npt nos $15 each
M38a1 starter, might need rebuild $50
And other stuff
Do the nozzles have hose attached? Either way sign me up for one. May be interested in the slave cable depending on length. I have a shorter one now that I would sell if I pick up a 20' one.
 

Oxyacetylene

Active member
Steel Soldiers Supporter
518
179
43
Location
Stoneville, NC
For Sale:
  • OE-254 Antenna system, complete kit with mast, guys, canvas bag, even the hammer! $250
  • Large snatch block, I believe it goes with a 5 ton wrecker $50 or trade for a mid sized one. Gallon jug shown only for scale.
  • SnatchBlock.jpg
  • Troop seats for M1078 LMTV. Make offer or trade. Not bringing unless spoken for.
  • M1079 van electrical box that controls the blackout functions. Has several relays and such. $40


Wanted: Matching connectors for the following that are located in the M1079 van enclosure:
  • 5 pin plug that fits the ECU power port
  • ECU_Power.jpg
  • 3 socket receptacle that fits the Nordic Air 9k BTU AC/Heat unit like this
  • AC_Power.jpg
  • 3 socket receptacle that fits the Thermostat port, it is a smaller connector than what is on the AC unit above
  • Thermostat.jpg
  • 4 pin plug that fits the Heater power port
  • Heater_Power.jpg
Also wanted:
  • Medium sized snatch block that fits 1/2-7/16 winch rope.
  • LMTV/FMTV mud flap bracket, the one that extends part way down the mud flap to keep it from swinging so far. The one pictured below.
  • MudFlapBracket.jpg
  • Field desk, possibly.
 
Last edited:

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,810
742
113
Location
Liberty Hill, SC
Do the nozzles have hose attached? Either way sign me up for one. May be interested in the slave cable depending on length. I have a shorter one now that I would sell if I pick up a 20' one.
No hoses, just the nozzles.
It is a 20ft cable
 

Attachments

Last edited:

SCSG-G4

PSVB 3003
Steel Soldiers Supporter
5,370
3,383
113
Location
Lexington, South Carolina
For Sale:
  • OE-254 Antenna system, complete kit with mast, guys, canvas bag, even the hammer! $250
  • Large snatch block, I believe it goes with a 5 ton wrecker. @Coffey1 may still want this, so he has first dibs
  • Troop seats for M1078 LMTV. Make offer or trade. Not bringing unless spoken for.
  • M1079 van electrical box that controls the blackout functions. Has several relays and such. $40
Wanted: Matching connectors for the following that are located in the M1079 van enclosure:
Also wanted:
  • Medium sized snatch block that fits 1/2-7/16 winch rope.
  • LMTV/FMTV mud flap bracket, the one that extends part way down the mud flap to keep it from swinging so far.
  • Field desk, possibly.
I can probably send a field desk with Adam (ferro). Will have to see what they are going for, and get the one I have over to him. Pics later.
 

Coffey1

Well-known member
Steel Soldiers Supporter
3,871
497
83
Location
Gray Court SC
Oxyacetylene go ahead and sell the block.
I am totally out of it sold the wrecker
No longer able to work with them.
Thank you for holding it for me thru the covid years.
 

INFChief

Well-known member
722
1,348
93
Location
New York
I have a HEMMTT wrecker control assy
LARGE tow bar
Funky HMMWV tow bar
M88 Ground hop kit
12 volt intervehicular cables
Etcetera
 

Attachments

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,719
19,766
113
Location
Charlotte NC
Having more than 1 thread will be confusing. Maybe all related posts should be consolidated? Unless, of course, I haven’t caught on to how it works yet…..
.
The plan for this thread was to list stuff for sale and stuff wanted.

The other Denton 2022 thread was for the event.
Who is going and details...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks