Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
A lot of the 1008 had gov - lock in the rear and many were changed to the Detroit in service. All of the 1028 had Detroits.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Detroit locker question
- Thread starter CUCVLOVER
- Start date
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Is the gov lock any good? I thought every m1008 had Detroit lockers
- 34,012
- 1,808
- 113
- Location
- GA Mountains
The parts TM's show only the Detroit in all UOCs except 209 which is the M1009.
MarcusOReallyus
Well-known member
- 4,524
- 816
- 113
- Location
- Virginia
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Thanks its my baby. And no its not a dumper its welded to the frame you should be able to pick up the truck by it
Last edited:
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
I tested the diff yesterday by doing donuts in some mud and it spun both tires with gusto and I stopped and started a few times and it acted like a limited slip. Then I tried something else. I put the trans in drive and rolled forward then I put it in neutral with light breaking I put it in reverse and I heard a CLICK followed by the dong when all the slack is coming out of the rearend.
What is the click?
What is the click?
Skinny
Well-known member
- 2,130
- 488
- 83
- Location
- Portsmouth, NH
Its tough to figure out what "acts like a limited slip" really describes. Is it both tires spinning exactly the same speed or both spin but one more aggresively. I don't believe the 14 bolt ever had a gear driven or clutch type limited slip. Only a Detroit or Gov-Lok as far as I'm aware. Both will spin both equally when locked up. The Gov-Lok typically lets out a loud bang when disengaging.
Just pull the cover to see what you have. Nothing short of that is guessing. Realistically, the Gov-Lok will feel like an open diff when you jack the rearend for inspection. The Detroit just feels like something is broken which is normal.
Just pull the cover to see what you have. Nothing short of that is guessing. Realistically, the Gov-Lok will feel like an open diff when you jack the rearend for inspection. The Detroit just feels like something is broken which is normal.
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Leave one tire on the ground, transfer case in neutral. Spin the tire off the ground by hand fast enough at it should lock. Mine did.
- 9,604
- 1,493
- 113
- Location
- mid- michigan
It is the only way to know for sure and it doesn't take any longer than reading through 3 pages of guesses in this thread .
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Thanks for the info. I'll try to do that this weekend
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Hello all.
First things first I know I asked y'all a question and you tried to help me and I just sort of left all of you hanging for that I am sorry. Between setting up my grandma a new place to live, clearing some land, a small construction project, wiring in, plumbing, trying to get the flooring replaced having problems with that, moving furniture, installing appliances and making things elderly friendly. Crazy weather, school, work, hunting and trapping and plus being forgetful, this upgrade to my truck got put on the back burner to the point of being forgotten about and with it this thread. I know it was wrong of me to just forget about y'all so I am sorry. Please accept my apologies.
I greatly appreciate all of the information that everyone here has given me and I know I have probably frustrated most of you by just dropping the thread.
But I plan to do the tire turning test by Saturday if the weather is nice enough. If I don't get done by it will probably be the weekend after that if I'm lucky.
So if I don't post my findings by Friday night please yell at me.
I do plan to put a Yukon grizzly locker in it some time by summer.
First things first I know I asked y'all a question and you tried to help me and I just sort of left all of you hanging for that I am sorry. Between setting up my grandma a new place to live, clearing some land, a small construction project, wiring in, plumbing, trying to get the flooring replaced having problems with that, moving furniture, installing appliances and making things elderly friendly. Crazy weather, school, work, hunting and trapping and plus being forgetful, this upgrade to my truck got put on the back burner to the point of being forgotten about and with it this thread. I know it was wrong of me to just forget about y'all so I am sorry. Please accept my apologies.
I greatly appreciate all of the information that everyone here has given me and I know I have probably frustrated most of you by just dropping the thread.
But I plan to do the tire turning test by Saturday if the weather is nice enough. If I don't get done by it will probably be the weekend after that if I'm lucky.
So if I don't post my findings by Friday night please yell at me.
I do plan to put a Yukon grizzly locker in it some time by summer.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
OK. I just did the test and with transfer case in neutral the tire and drive shaft will turn as long as I want it to.
With the transfer case in 2 high when I turn on tire the other turns in the opposite. So I guess it has a gov-lock. I would pull the cover but I don't have the gaskit or any oil for it and I don't know when I will have time to get it.
Thanks for the help and again my apologies for leaving y'all hanging for so long
With the transfer case in 2 high when I turn on tire the other turns in the opposite. So I guess it has a gov-lock. I would pull the cover but I don't have the gaskit or any oil for it and I don't know when I will have time to get it.
Thanks for the help and again my apologies for leaving y'all hanging for so long