Deuce belt driven power steering complete

[67n20 Harper]

View attachment 751080I have full steering same as I did before the conversion.
Will turn from stop to stop. I have had no hard spots on the wheel due to the belt slipping.
There have also been no squeaking.
The picture you see here is the first way I had the pump. But when I went to put the fender on it hit the pulley.

Which pump did you use? Model#??

 

[Bill in pa]

Which pump did you use? Model#??

I used the pump and reservoir from a mid 60's C60 dump truck. Has a Saginaw power steering box. I bought the pitman arm and steering shaft from "Waterloo equipment" if you have any ?'s... Binnalljr at yahoodotcom

 

[GopherHill]

Nice clean install! Congratulations on your workmanship.

 

[montaillou]

How do you have so much space between the air compressor pulley and the radiator??? I want to mount an A/C compressor and can't figure out where I can squeeze it in.



I have 2 alternators on the other side.

 

[getheated]

For the last two week I've been off work so here's what I've been doing.
I started with a 1987 A.m. General deuce and a half.
Removed the driver side fender and many other parts.
I went to a scrap yard I knew of and he had the Mid 80's chevy with the gear box I wanted.
After removing from the truck I paid the guy the $100 he wanted.
There were brackets to be made. Belts to be switched and admittedly ordered the steering shaft and drag link from waterloo truck.
LOOONG story short it works great. Box and Pump were NOT rebuilt. No leaks. No drips..
If anyone has any question please contact me directly.
I have more pictures to share just not up loaded yet.

Im not 100% sure I can do this but my name is Bill.

My email is binnalljr@yahoo.com

Bill I have tried emailing you on this topic. You still around?

 

[ldmack3]

Bill does this steering box limit your RH turn>
Are you running super singles?