Deuce High beam issue

[LiveFreeOrDieTryn2B]

OK fellas I bypassed the wires to the high beams hooked them to the dimmer switch and now have them working I will makeup the permanent wires for them and the indicator light.Here soon gonna work on a fuel leak today nothing major and jump back over to the electrical later.Thanks for all the replays guys.

 

[papakb]

The 3 wires going to the headlights are 17, 18, and 91. There is no #16. If you have anything with power on it going to that wire that's your problem, 91 is GROUND. Here's the diagram for the Master Light Switch:



http://i1204.photobucket.com/albums/bb402/papakb/Master Light Switch_zps3dwwsvei.jpg

Hope it helps.

Kurt
KG6KMJ

 

[Big Dumb Truck]

16 is the power from the light switch to the dimmer switch.

 

[LiveFreeOrDieTryn2B]

Yes #16 is from the dimmer

 

[papakb]

I was talking about the wiring to the headlamps. Lot's of people think the wires to the lamps are 16, 17, and 18 when they're 17, 18 ans 91. A very common mistake and if you cross connect either 17 or 18 to 91 it's blows the breaker.