Deuce higher air intake

[sac]

Hello,

Was woundering if the air intake on this Deuce is hand made or a special pakage?

Thanks Scott

 

[swbradley1]

Looks like it is just an elbow with a short extension.

You can use PVC pipe, it drives people nuts.

 

[m109a2]

I bought walker exhaust pipe for my snorkel you can get the part# from peashooters thread.

 

[Jeepsinker]

You can go to any exhaust shop that bends 4" pipe and have them bend you up a one piece or two piece unit. Whichever you prefer.

 

[dmetalmiki]

I have seen plenty of deuces with extended intakes over here, they looked stock fitting.

 

[peashooter]

Hello,

Was woundering if the air intake on this Deuce is hand made or a special pakage?

Thanks Scott

Here is a link to my snorkel build that has some part numbers for the pieces to buy: http://www.steelsoldiers.com/showth...Build-Thread&p=1376667&viewfull=1#post1376667

 

[sac]

Here is a link to my snorkel build that has some part numbers for the pieces to buy: http://www.steelsoldiers.com/showth...Build-Thread&p=1376667&viewfull=1#post1376667

Thank you. I realy like you truck. Do you have you slobber tube moved?
Thanks Scott

 

[peashooter]

Thank you. I realy like you truck. Do you have you slobber tube moved?
Thanks Scott

Nope its still in the stock place

 

[saddamsnightmare]

April 25th, 2015.

Plain old NAPA 4" exhaust elbow, and two clamps. It gets your intake off the fender, and keeps the filter element from sucking in snow and rain (which cuts the efficiency down considerably).

 

[sac]

April 25th, 2015.

Plain old NAPA 4" exhaust elbow, and two clamps. It gets your intake off the fender, and keeps the filter element from sucking in snow and rain (which cuts the efficiency down considerably).

Thank you.