• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce is Dead - Or so it seems

NTXSCANO

New member
3
0
0
Location
Celina, TX
So I've had my M35A2 for about a month and a half now. Runs and drives great. Well, runs great... drives as they all do. Anyway, it rarely goes more than 4-5 days without at least a start-up. Always cranks right up. So last night I went to start it, flipped on my power, everything lights up, buzz is buzzing loudly... I go to start it and it makes sort of a funny sound for about a half a second (can't describe it... maybe an electrical funny sound) then everything shuts off. No more buzzing, lights, etc. Dead. Now it's as if the batteries are disconnected. The batteries are good. Any thoughts as I dig into this? If the solenoid goes out, would that cause it to loose all the power?

Thanks in advance for your assistance.

J
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,263
1,767
113
Location
Dayton, OH
Check your grounds and the battery terminals.

If any are loose or corroded it can exhibit those symptoms.
 

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,995
2,561
113
Location
Montevideo/Uruguay
Basics first: check all battery posts and ground connection. Then measure/confirm each battery's voltage; 12.7 V at least.







Edit: Ha, Steve, you typed faster!:)
 
Last edited:

NTXSCANO

New member
3
0
0
Location
Celina, TX
You are all right. It was a terminal that came loose. I tightened it down and all is well in the world. Thanks so much for your help.
 

porkysplace

Well-known member
Steel Soldiers Supporter
9,604
1,494
113
Location
mid- michigan
Probably still a good idea to clean all the connections , loose cable and arching can make for a bad connection.
 

DavidWymore

Well-known member
1,598
164
63
Location
El Centro, CA
Probably still a good idea to clean all the connections , loose cable and arching can make for a bad connection.

Yes, do it! These kinds of problems seem to come in batches. Terminal lug on the ground cable from the starter to frame cracked and melted off on mine, among other things.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks