• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce locking fuel cap

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
In VN, a lot of our trucks had tank cap locks, kept the little rat bast-ards from droping a garnade wraped in a rubber band in, the rubber band let go in a bit , bang
 
Last edited:

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
Uh....

Which idea are you complimenting with that post???

The one about brazing the tank with fuel inside
OR
The one about dropping a GRENADE in the fuel filler?????

Just wunnerin'

:shock:
Thay would lift the cap, pull up the filter, drop in the grenade, after a while the rubber band rotted, bang
 

willy

New member
101
1
0
Location
Martinez, CA 94553
Lock

Yes simple idea and you could weld the nut on the bolt this woudl make it difficult to remove.
But I like your disclaimer take off the strap it does not look like you did the bolt on the strap is not removed any way it does not look like it.
Willy:)
 

joshs1ofakindxj

Active member
738
120
43
Location
SW PA
I was thinking about drilling a hole in one of the tabs on the fuel tank cap, then padlocking a chain to it which would be bolted directly to the frame behind the fuel tank. The chain would be tight so that once the lock was on the cap couldn't be turned.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks