spentshell
Member
- 413
- 2
- 18
- Location
- Long Island NY
What is the best transmission fluid to run in the deuce transmission I was speaking to a local truck mechanic and he told me straight 50 was the best to use. Any thoughts......
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
deuce transmission oil
- Thread starter spentshell
- Start date
jwaller
Active member
- 3,724
- 19
- 38
- Location
- Columbia, SC
GL1 spec'd. 80/90.
I use mobil 1 syn in my trans as it has the MT1 spec so it's compatible.
napa carries the GL1 in 5Gal buckets.
I use mobil 1 syn in my trans as it has the MT1 spec so it's compatible.
napa carries the GL1 in 5Gal buckets.
- 26,246
- 1,179
- 113
- Location
- NY
There have been many lengthy posts on this.Here is one of them that has some good info, http://www.steelsoldiers.com/index....8&postdays=0&postorder=asc&highlight=napa+mt1 There are several personal choices but the Gov spec is for GL-1. You can get it at NAPA. Whatever you choose, be sure it is MT-1 "yellow metal safe".(ie. non corrosive to bronze or brass alloys)
spentshell
Member
- 413
- 2
- 18
- Location
- Long Island NY
Thanks Doghead. There have been alot of personal choices in the posts I searched and my head slowly starts to spin. I am getting ready to change my fluids out and just want to be sure. Tanks again
jasonjc
Well-known member
- 5,326
- 290
- 83
- Location
- Gravette Ar.
Re: RE: deuce transmission oil
Only slowly?? Mine spins like a topspentshell said:
FreightTrain
Banned
- 2,730
- 13
- 0
- Location
- Gadsden,Al
RE: Re: RE: deuce transmission oil
Be careful with Synthetics.I have read a few post of trans burning up cause of Synthetic use."TOO" slippery.Doesn't climb the gears and lubricate the upper parts.
Be careful with Synthetics.I have read a few post of trans burning up cause of Synthetic use."TOO" slippery.Doesn't climb the gears and lubricate the upper parts.