• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Do I Need a Wheel Dolly?

rneely

Member
163
1
18
Location
Casco, MI
Have a leak on left rear wheel (frt rr axle) and will have to take wheels off to see if it is a wheel cylinder or axle seal problem.
Can I do this by pulling one wheel at a time and then the hub or should I borrow a wheel dolly and take both wheels off at same time with hub?
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
I take them off one wheel at a time, but if you have a smooth work surface and a wheel dolly, it's a nice time saving trick.
 

cattlerepairman

Well-known member
Steel Soldiers Supporter
3,256
3,355
113
Location
NORTH (Canada)
If you have a smooth work surface, a pallet jack (pallet cart) works well, too. Take this from the guy who normally has to work in the gravel driveway...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks