• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Dropside Hardware

jonesal

Mission Specialist
Steel Soldiers Supporter
413
69
28
Location
Brookings, SD
I'm trying to figure out the stock configuration of the hardware (retaining clip and anchor pin setup) between the long side rack and short side rack of a dropside. I have most of the parts collected but do not know where the "S" clips from the chains attach that retain the pins and clips. The hardware is parts 15 through 20 on the first picture and my question is where do the "S" clips attach from the chains on parts 16 and 17 of the second picture? If anyone would post a real picture of a stock setup, that would be appreciated. I can guess how to bend the "S" clips to make something work, but would like to do it right.

I'm still looking for 4 of the brackets, part 18 in the first picture. Any leads is appreciated.

Thank you,
Allen
'84 M923
 

Attachments

jonesal

Mission Specialist
Steel Soldiers Supporter
413
69
28
Location
Brookings, SD
Fantastic! Thank you. I have found all the parts except the two "half moon" brackets (four total) that hold the loop on. If I find those, I be in business. Thanks again - now I know how it all bolts together.

Al
'84 M923
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks