Dual output pto adapter question of operation

[M35a2duece]

I currently have an m35a2 with winch. I'd like to add another pto output to send power to a hydraulic pump for a dump box. My question is can the Rear output of the pto add on unit be separatly engaged from the front? Will my winch need to be disengaged before I could use the hydraulic pump ran by the Rear output? Or is There 2 separate engagement levers? Sorry if something already exists describing this. I tried looking but cant even find a picture.

 

[simp5782]

There is a double ended PTO for the deuce.

Useful Thread hopefully.

https://www.steelsoldiers.com/showthread.php?99343-Rear-output-PTO

Or a transfer case PTO

https://www.steelsoldiers.com/showthread.php?87361-M35a2-Transfer-case-pto

 

[M35a2duece]

Thanks! I didn't know there was a rear t case pto. I think I need the Rear output adapter for my current transmission one, or at least I think it's more appropriate since then I won't be able to run the pump backwards as well.

There must be 2 shifter levers for it since text in those threads refrence that they can be shifted independently

 

[gimpyrobb]

Thanks! I didn't know there was a rear t case pto. I think I need the Rear output adapter for my current transmission one, or at least I think it's more appropriate since then I won't be able to run the pump backwards as well.

There must be 2 shifter levers for it since text in those threads refrence that they can be shifted independently

Yes different shifters. If you look in the TM it will illistrate the parts. You are correct about what you need.

 

[M35a2duece]

Any idea what tm has linkage illustration? I looked in the ones regarding pto and transmission and they only really have exploded views of the pto assemblies

 

[gringeltaube]

TM 9-2320-361-20P, Fig. 231 and 237

 

[M35a2duece]

Thanks! That helps allot!