-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Electrical Help Please.
- Thread starter oldshep
- Start date
- 8,518
- 2,698
- 113
- Location
- Monrovia, Ca.
Is the light switch in the dash light mode?
El_Guapo
Member
- 128
- 0
- 16
- Location
- Sandy Springs, GA
The only thing to do is make sure your meter is working correctly then work your way back. Or you could lick it 
Edit: Try grounding one lead to the chassis and metering one wires at a time.
Edit: Try grounding one lead to the chassis and metering one wires at a time.
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
A good ground for reference is important. Use an aligator clip on bare metal or better yet, run a long ground wire to the battery neg terminal.
cbvet
Active member
- 1,567
- 20
- 38
- Location
- Northwest (Knox) Indiana
I agree with Bjorn.
When I get nothing using a "convenient" ground, I get out my 20 foot jumper wire & go right to the battery.
In my 45 years of working on vehicles, I've found a poor ground to be the problem well over half the time.
Eric
CBVET
When I get nothing using a "convenient" ground, I get out my 20 foot jumper wire & go right to the battery.
In my 45 years of working on vehicles, I've found a poor ground to be the problem well over half the time.
Eric
CBVET