• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Electrical problems

borky51

Member
53
1
8
Location
Hartland WI
I have a problem not me my deuce, When I put the lights on everything works then when I put the turn signals on the lights go out and I have to rest the light switch. My directional don't flash I put a new flasher in When the air pressure is low the directional work when I turn them on and off manually the directional lights don't flash but go on. I'm stumped does anyone know what the problem could be or where to start. please help Borky
 

Jeepsinker

Well-known member
5,399
456
83
Location
Dry Creek, Louisiana
You are tripping the circuit breaker in the switch. You need to inspect your harness for a short to ground. Check mainly around all four signal lamps back up into the frame, and check under the dash around the steering column.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks