Ever see a m105-DT

[SR71BLACKBIRD]

Heres a m105 my dad and I finnished today. Have to paint it yet.
i call it a 105-DT (dump trailer) Dumps a cool 50 degrees. Will probably sell it on shebay or craigsbliss.

 

[powerhouseduece]

Never seen one but would like to see pics of how you did it. Please

 

[BFR]

ok, give us the details... and bigger pics

 

[randyscycle]

Nice setup! Thinking of doing that to my deuce.......

 

[powerhouseduece]

Sorry, Im new can you tell. Here are the pics.

Its ok im still new myself. How about a few detials? 12 or 24v pump?

 

[SR71BLACKBIRD]

Thanks, It is electric over hydraulic 12 volt (all self contained) So it works by itself or hooked to anty truck. We make these pickup friendly so anyone can use them.
We usually go with a ball style hitch, remove landing gear and install new jack, and install a trailer light kit.
Weighs 2400 lbs on average. My friend and I finnished one last week for hauling roofing (shingles) with a single 4 inch by 24 inch cylinder with power down also.

 

[randyscycle]

The 12 volt and ball hitch may be a deal killer for the MV folks though....

 

[gimpyrobb]

Well, they hadn't been building them for us. Just the "normal guys".

 

[WillWagner]

I agree, more info! That would suit my needs better than a tipper deuce. Who made the hydraulics?

 

[clinto]

I think that's a great idea. And making them 24V is simple-just install a different pump and put a slave cable connector on it.

Bigger pics!!

 

[SR71BLACKBIRD]

My dad and I scratch build the hoists. If i knew it would sell I would leave one set up for the m35 and add a 24 volt sysyem. I have a very clean m105 with top and bows that would look great behind a clean Deuce.
I have problems getting bigger pics to upload to this site.

 

[bill45colt]

m105 dt

Great idea
what about price for complete unit including trailer with 2" ball hitch
thanks
bill45colt@yahoo.com

 

[bill45colt]

Great idea
how about price including trailer and 2" ball hitch
bill45colt@yahoo.com

 

[SR71BLACKBIRD]

The stock trailer with 24 volt hyd. unit , stock landing gear, stock lights and brakes, with 2 inch hitch.
$1800 Truck and trailer combined $5100 let me know thanks

 

[comdiver]

Do you build a subframe to lift and support the box? How much will this dump?

 

[bottleworks]

Hmm, an Air-over-Hydraulic pump would make this great for a deuce. HF sells them cheap too. No need for additional power.

 

[SR71BLACKBIRD]

No subframe used, all we need is more height. We set the relief valve on the last trailer at 3000 lbs for safety but I think much more is possible. The 3000 lb setting dumped a heaping load of firewood with plywood on sides and most loaded on the tonge to test hoist strength. here is the picture of the load.

 

[tm america]

actually the 12 volt pump works better on 24 volts they run better on 24 just have to put 24 volt relays on there cuz 12 volt ones cant take the extra juice i have a 12volt pump on mine ive been running it for 5 years on problems the guys at the lowrider shop by my job run 12 volt pumps on 48 volts to get the volume they need to make em jump.seems like the motor built more heat when i had it running on 12 volts to since i had the set up on another truck first plus it was really slow on 12 and its the highest volume 12 pump i have seen

 

[timntrucks]

that would be great to have a trailer that dumped.

 

[BKubu]

I am not one for mods, but that is a cool one. Great job!