nf6x
Feral Engineer
- 1,630
- 50
- 48
- Location
- Riverside, CA, USA
yellobronc said:
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Expansible Van Body Corroded Stuck!
- Thread starter mdd0127
- Start date
- 5,365
- 3,368
- 113
- Location
- Lexington, South Carolina
Rollout windows
I fixed the rollout windows on my shop van by drilling several small holes near the bottom on the sides and running a #8 bolt through With just the screw head showing on the outside and a nut and lock washer on the inside, it was easy to do some paint touch up. As heavy as those windows are, it would probably be a good idea to use two bolts on each side, with the bottom one about three inches from the bottom edge and the next one about six inches above that. Then it's not depending on the crimp into the dried out or dry rotted wood. JM2C
I fixed the rollout windows on my shop van by drilling several small holes near the bottom on the sides and running a #8 bolt through With just the screw head showing on the outside and a nut and lock washer on the inside, it was easy to do some paint touch up. As heavy as those windows are, it would probably be a good idea to use two bolts on each side, with the bottom one about three inches from the bottom edge and the next one about six inches above that. Then it's not depending on the crimp into the dried out or dry rotted wood. JM2C