- 10,865
- 762
- 113
- Location
- Appomattox, VA
Coming along very nicely, Dennis! Love to see that doing recoveries at Haspin this year. I heard gimpy isn't bringing the wrecker this time, so we need a replacement!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Extensive M108 repairs, part 2
- Thread starter Stretch44875
- Start date
- 2,960
- 30
- 48
- Location
- Tiro, Ohio
Hmm.. didn't hear about the wrecker no show...
Truck is together, finished the hardtop and a couple little things. Also installed one of the tank dome lights, I love it. Low light is perfect for driving, and the high light is nice and bright.
Went on a 40 mile drive tonight. Engine clatters a lot louder than my other truck. I had set the timing for non-turbo, figured advancing it might help on the power side. Going to back the timing off to the turbo setting, see if it's quieter.
Need to switch around some tires, and power wash it.
Truck is together, finished the hardtop and a couple little things. Also installed one of the tank dome lights, I love it. Low light is perfect for driving, and the high light is nice and bright.
Went on a 40 mile drive tonight. Engine clatters a lot louder than my other truck. I had set the timing for non-turbo, figured advancing it might help on the power side. Going to back the timing off to the turbo setting, see if it's quieter.
Need to switch around some tires, and power wash it.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Got pics? That was record time Dennis! Sucks that mine is going on 3 yrs and still looks the same!
- 2,960
- 30
- 48
- Location
- Tiro, Ohio
I'll take a bunch of pics at the findlay show. Looks like a M35a2 with a crane!
No.2Diesel
New member
- 1,264
- 11
- 0
- Location
- Huntington, NY
Hi,
Wow very cool Stretch...Thats some fast progress! Much faster than our engine swap!
That man lift sure comes in handy!
What you need is a Crawler Loader! It handled this with ease and is nice and stable.
Good luck doing the finishing touches. It looks great.
Wow very cool Stretch...Thats some fast progress! Much faster than our engine swap!
That man lift sure comes in handy!
What you need is a Crawler Loader!
It handled this with ease and is nice and stable.Good luck doing the finishing touches. It looks great.
Attachments
- 2,960
- 30
- 48
- Location
- Tiro, Ohio
Just got the timing adjusted, and 20 mile drive. It's much quieter, other than the loud exhaust. Still a little clatter, but not bad. Also found and fixed a couple oil leaks.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Bout ready for Aberdeen Dennis? Remind Gimpy to get my towbar parts please!
- 2,960
- 30
- 48
- Location
- Tiro, Ohio
Here's some finished for now pics. Looks a lot different! And runs a lot different. Took about 15 miles, and then it was warmed up enough to hold 50-55mph. That was with the 6000lb trailer behind it. Sounds real good, no problems there or on the way back, put about 140 miles on the truck. Truck ran really well on the way home.
I don't think I'll ever drive a MV to Aberdeen. A little too far for me.
Okay Kenny, your turn! Lets see some M108 repair action!
I don't think I'll ever drive a MV to Aberdeen. A little too far for me.
Okay Kenny, your turn! Lets see some M108 repair action!
Attachments
Last edited:
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Excellent report Dennis. Now lets hope Gimpy makes it home safe in the 1/2 goosechase truck.
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
So how was the show Dennis? Truck looks good! Nice work I know that took allot of it..