• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Ferret Engine

datadawg

New member
253
4
0
Location
Bucks County, PA
Bump. I am curious to see how this turned out. The Ferret transfer box takes power from the transmission and splits it to left and right sides, where prop shafts send power to bevel boxes at each wheel. You have 4 bevel boxes that need to be
powered. I am struggling to see how you will make this work. Here is a schematic of the Ferret driveline, courtesy of this website: http://www.ferret-fv701.co.uk/usfulinfo/transmission_layout.gif

Number 5 in the photo shows the transfer box and number 2 shows front bevel boxes. The prop shafts run inside the driving compartment! Sorry, I could not imbed the picture.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks