- 5,364
- 3,368
- 113
- Location
- Lexington, South Carolina
Coleman's Surplus in PA has brand new 15 gallon pots, and the square roasting pans. Check their catalog.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Field Stoves
- Thread starter Armada
- Start date
- 2,520
- 18
- 38
- Location
- San Angelo, Tx USA Planet Earth
they are sold out of the square roasting pans
dang, that didn't take long
they still have the pots with lids though for $89, which is pretty good...
dang, that didn't take long
they still have the pots with lids though for $89, which is pretty good...
- 3,132
- 1,638
- 113
- Location
- Pemberton, N.J.
I found this post from 2006 and I can attest that at Aberdeen last year Maddawg still likes to burn his eyebrows off!
Rick
25thIDAirAssault
Member
- 267
- 4
- 18
- Location
- Augusta, New Jersey
M-59 Ranges
To all,
Anyone on the East Coast that goes to Sussex or Aberdeen, I am in need of 2 M-59 Ranges. Can anyone help me out?
John
To all,
Anyone on the East Coast that goes to Sussex or Aberdeen, I am in need of 2 M-59 Ranges. Can anyone help me out?
John
- 5,364
- 3,368
- 113
- Location
- Lexington, South Carolina
I have a couple of complete ones, in the wooden box. but since they weigh 275 pounds each as boxed, I'm not moving them, much less taking them to a show, even to the SC, NC or GA Rallies. 60 pounds of that weight is the un-used M-2A burner in the bottom. That IMHO is scrap at best, but it's part of the package.
If you really want one or more, I'll show you where they are, and all the stuff you will have to move out of the way to get to them (and it's a lot - probably an hour's worth of labor) and I'll give you hints to make moving them easier (a pallet jack would make it a lot faster), and I'll watch you struggle to get them into your truck or trailer. I've already moved them three or four times, and I'm not doing it again!
If you really want one or more, I'll show you where they are, and all the stuff you will have to move out of the way to get to them (and it's a lot - probably an hour's worth of labor) and I'll give you hints to make moving them easier (a pallet jack would make it a lot faster), and I'll watch you struggle to get them into your truck or trailer. I've already moved them three or four times, and I'm not doing it again!
25thIDAirAssault
Member
- 267
- 4
- 18
- Location
- Augusta, New Jersey
M59 Ranges
Mike,
You are saying these units are brand new. Correct me if I am wrong, but won't the MBU 100's and 103's slide right in once you remove the M2A's? Also, they would still have the manuals and utensils, correct? If I ever get down that way picking something up I will give you a call. No chance of getting 2 of them to Cable for transit to Aberdeen? If so how much? Thanks in advance.
John
Mike,
You are saying these units are brand new. Correct me if I am wrong, but won't the MBU 100's and 103's slide right in once you remove the M2A's? Also, they would still have the manuals and utensils, correct? If I ever get down that way picking something up I will give you a call. No chance of getting 2 of them to Cable for transit to Aberdeen? If so how much? Thanks in advance.
John
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
I know this is an old thread, but it was brought back up to the front and thereby subject to the updated ruled...
Please refrain from posting wanted/for sale ads in the forums. That's what the classified section is for.
- 5,364
- 3,368
- 113
- Location
- Lexington, South Carolina
Tom,
Re-read my second paragraph! That's why they are not in the classifieds.
Re-read my second paragraph! That's why they are not in the classifieds.
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
Mike, I wasn't refering that toward you...I quoted 25thIDAirAssault because that is a blatent "parts wanted" request and should be in the classifieds
- 3,132
- 1,638
- 113
- Location
- Pemberton, N.J.
Sometimes I think exceptions have to be made. This came about as hapenstance. It was not a sale looking to happen, it was a member who happened to see something he needed and asked about it. At that point it could go to PM's.
Rick
Rick
- 3,132
- 1,638
- 113
- Location
- Pemberton, N.J.
I could probably transport from Aberdeen, Mike knjows what my rig looks like with the mutt on it so he would know whether they would fit.
Rick
Rick
- 5,364
- 3,368
- 113
- Location
- Lexington, South Carolina
Rick,
It would take me more than an hour to get to where the stoves are buried in my garage and clear a path to wheel them out, and almost another hour to put everything else back in the garage. The plywood boxes are 2 x 2 x 4 feet high, made with heavy plywood, and each M59, in the box, weighs 275 pounds. I have no way to lift them onto a trailer, or a trailer to move them even across town. Green_Gator and Stampy each wound up with one of them a year or so ago - John can PM them as to the condition they are in.
Eric,
Read the above paragraph - it'll be a lot more involved than 'transportation needed'
It would take me more than an hour to get to where the stoves are buried in my garage and clear a path to wheel them out, and almost another hour to put everything else back in the garage. The plywood boxes are 2 x 2 x 4 feet high, made with heavy plywood, and each M59, in the box, weighs 275 pounds. I have no way to lift them onto a trailer, or a trailer to move them even across town. Green_Gator and Stampy each wound up with one of them a year or so ago - John can PM them as to the condition they are in.
Eric,
Read the above paragraph - it'll be a lot more involved than 'transportation needed'
Last edited:
25thIDAirAssault
Member
- 267
- 4
- 18
- Location
- Augusta, New Jersey
Speddmon,
Did not mean to cause any trouble, just saw a post about the M-59 ranges and asked for help, because that what usually happens here. People offer to help or give advice. I didn't realize I crossed the line. Will PM in the future instead of posting. My bad, sorry. And Mike was just trying to assist like he always does, sorry Mike, I will send you a PM about the ranges.
John
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
John,
Asking for help is not a problem at all, and there are a LOT of wonderful folks here who are willing to help out quite a bit. But recently the Owners spent a lot of time revamping the classified ads and added a "parts wanted" section for just such requests as yours. They want to keep the classified type posts out of the main forum so it doesn't become a site full of people just coming to hawk their wares and not contribute to the community. The only downfall to the classified section is you need a premium membership to access them. Although it is a very low yearly fee, it's still a fee to use them.
Asking for help is not a problem at all, and there are a LOT of wonderful folks here who are willing to help out quite a bit. But recently the Owners spent a lot of time revamping the classified ads and added a "parts wanted" section for just such requests as yours. They want to keep the classified type posts out of the main forum so it doesn't become a site full of people just coming to hawk their wares and not contribute to the community. The only downfall to the classified section is you need a premium membership to access them. Although it is a very low yearly fee, it's still a fee to use them.
- 9,604
- 1,493
- 113
- Location
- mid- michigan
The wanted to buy ads are free , you just need to pay to sell .
- 5,364
- 3,368
- 113
- Location
- Lexington, South Carolina
SPEAK UP!!!!!! I could use the room in the garage!