Fitting size?

[DaneGer21]

Does anyone know off the top of their head what size and pitch, or what the fitting is that’s on the fuel outlet on top of the tank? It’s a flare fitting originally, but I’m at work and can’t actually size the female side. I’d like to find a fitting to screw into it other than the original flare. I’d like to convert right to my DOT plastic lines, versus a compression/compression conversion from a small copper section to plastic.

Hope that makes sense.

I’ll attach a screenshot of an old picture of mine…circled in red…

Thanks

 

[frank8003]

4730-00-014-2435

4730

000142435

Inverted Nut, Tube Coupling

03857

This is 1/2" inverted tube nut
Took about three minutes to find it in the TM
Why not just make it from tubing?

 

[DaneGer21]

Sorry I must be misunderstanding, I want to remove the original fitting and copper all together. Then replace with a fitting that adapts from that 1/2” thread to 1/2” compression so I can connect my brand new plastic lines

I appreciate the info, I’ll hunt down what I need from there

 

[yolner]

The summitracing website is really good for tracking down weird adapter fittings like that. They should have something to go from 1/2 inverted to JIC.

 

[doghead]

Look up the part number in the parts technical manual. Then look it up on Parttarget, for all the specifications.

 

[frank8003]

Is this them?
Eaton Weatherhead 1868X8X8 Brass CA360 D.O.T. Air Brake Tube Fitting, Male Connector,
1/2" NPT Male x Tube OD