• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Flat or satin.....

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
My experience with flat paints is they show greasy fingerprints, dusty fingerprints, just everything...... etc.

I was thinking of using satin since I have had good experience with clean ability.

Do those that have done satin like it better?

My truck will not match true military finish anyway, so this is a functionality question only. The truck will be haze gray.

Thanks!


Sent from my iPhone using Tapatalk
 

Karl kostman

Well-known member
Steel Soldiers Supporter
2,308
893
113
Location
Fargo ND
When I painted my deuce I wanted a very flat OD Green thinking that this would best match the original Military paint, the painter fellow called me about the paint I had picked out to discuss just how FLAT it really was, it took me about 2 seconds of looking at it and feeling it to see it was WAY TO FLAT to the point of being just about porous! NO its very easy to take the term flat way to far, if I had stayed with that first flat I would have never gotten the truck clean because like you said every greasy finger, muddy boot print everything would have been there forever. I had the painter cut the paint a lot to give it a good mellow satin finish the truck is easily cleaned, nothing stains it and the paint is truly sealed to contaminates! Its the only way to go in my eyes!
Karl
 

bachman502

Active member
Steel Soldiers Supporter
228
58
28
Location
Chesapeake, VA
I’m contemplating the same thing Ramdough. I have to make that decision soon. Are you using Behr paint? Search for member buffalobwana. He painted his m923a2 in satin.
 
Last edited:

osteo16

Well-known member
Steel Soldiers Supporter
587
588
93
Location
Evansville, IN
I’m doing Satin currently on my m998 rebuild for the entire undercarriage.. Hoping this makes cleaning a bit easier... Contemplating a Satin exterior with Flat accents on some trim pieces...

Ocho
 

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
I’m doing Satin currently on my m998 rebuild for the entire undercarriage.. Hoping this makes cleaning a bit easier... Contemplating a Satin exterior with Flat accents on some trim pieces...

Ocho
I went all satin..... it looks flat-ish but feels smooth so does not show smudges as much.


Sent from my iPhone using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks