AZperformance
New member
- 5
- 0
- 1
- Location
- Phoenix,AZ
I mean to say, can the high speed ring gear be inserted into the stock chuck?
Sent from my iPhone using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
FMTV High Speed Gears
- Thread starter NDT
- Start date
Sent from my iPhone using Tapatalk
- 1,425
- 37
- 48
- Location
- Winter Haven, florida
I do not have these anymore, they did not last 5 minutes. I would like to slap the idiot that started this "high speed gear" slang. It is RF-611 with 3.07 ratio.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
lol...... with ya on that..... High Speed gear is very much an Oxymoron for that gear set.
hokanson86
New member
- 11
- 0
- 0
- Location
- Spokane wa
Wheelspinner
Are those gears for the 6x6 still available do you know? Never mind I saw that they are gone but dont know how to delete my post.
Are those gears for the 6x6 still available do you know? Never mind I saw that they are gone but dont know how to delete my post.
Last edited:
- 3,021
- 222
- 63
- Location
- eldersburg maryland
If you check the classified section you will find that the 3.07 diffs are available again. NEW
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
not sure it is in classifieds here but a few 6x6 3.07 power divider/third member are available from someone else too.
Hodor
New member
- 11
- 0
- 1
- Location
- Central washington
Any updates on this information? Custom sets can be pricey but machine shops can be all over the place as well. I'm very interested to hear if this a feasible possibility.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
Yes the third can be disassembled and new R&P installed.
Note.. there is a difference in part #'s noted in here somewhere for the Power Divider's R&P. Don't recall of top of my head if it was the ring or pinion that is different
AZperformance
New member
- 5
- 0
- 1
- Location
- Phoenix,AZ
I spoke to Several gear manufacturers at SEMA most of them can make a small production run of the ring in pinons. Problem is I have not found an available Set to clone.. yet
Sent from my iPhone using Tapatalk
- 10,457
- 6,529
- 113
- Location
- Camp Wood/LC, TX
Why would anybody want to have gearsets made or install takeouts when brand new Meritor gearsets can be installed by MTP Drivetrain for $1750 per axle?
1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Is their some one,by name I should talk with about this work at MTP ? Thanks
Hodor
New member
- 11
- 0
- 1
- Location
- Central washington
Custom gears = better ratios = better mpg
Custom tcase 1st gear = factory low range capabilities = best of both worlds, no?
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
made gearsets would be for a ratio determined to be better than the 3.07 which are better than the OEM but not really very close to ideal (so the math says according to previous threads in here). Also for some..... the cost of driving to MTP, and in particular the loss of wages during that time your away, etc. .... exceeds the cost of buying a new third and having it shipped for local install.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
Different topic for different thread.
- 10,457
- 6,529
- 113
- Location
- Camp Wood/LC, TX
I thought the consensus was 3.07 IS ideal? How much faster than 65 do you want to cruise?
The deal at MTP is you ship them your chunks ($150) and they ship them back all 3.07ed up. If you let them do the chunk pulling, the price goes up. Joe is POC at MTP.
1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Thanks for the name. NDT
The faster thing will be limited to the tires ! My tires are 2003's and I will not push them faster than 45mph. But that is just me.
The faster thing will be limited to the tires ! My tires are 2003's and I will not push them faster than 45mph. But that is just me.
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
MTP sounds like a fair deal. By time you ship twice each pig its about same cost as the ones that just came available. As to different gears... as the 3.07 sources are drying up...... and that pushes folk into getting ones made..... might as well make ones more ideal. as to why not 3.07?? it is nothing to do with speed. It is putting the engine best into its powerband for most efficient use and longevity of the engine. Forget what was calculated in here to be a closer match to the engine(s). My sucky memory says it was something around 2.90?? though I would worry that if you got down into ideal for power band at highway speeds...... you would loose offroad ability. Was that discussion further back in this thread or another?
Last edited:
AZperformance
New member
- 5
- 0
- 1
- Location
- Phoenix,AZ
That’s a decent price..
The main reason would be Convenience. If you live in the north it’s a huge pain in the keister to get your truck to Louisiana.
Sent from my iPhone using Tapatalk
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
You take the pumpkins out and freight them on a pallet to MTP they do the swap and then you freight them back and install them. Would be easier if you can get the gear set and have a local shop do the entire swap though.
- 464
- 267
- 63
- Location
- Seville, OH
Can you provide a link. I looked in the SS FMTV 2.5T TM section and did not see these.