Fmtv wheel studs

[Stevekelley]

I could use a couple studs and nuts.....ill buy them

 

[jack/ny]

I could use a couple studs and nuts.....ill buy them

The bolts for the wheel half’s can be found at NAPA.

jack

 

[Stevekelley]

The bolts for the wheel half’s can be found at NAPA.

jack

Awesome thanks!

 

[Stevekelley]

The bolts for the wheel half’s can be found at NAPA.

jack

Do you have the part number from NAPA? I went there and they couldn’t find a match.

 

[jack/ny]

Do you have the part number from NAPA? I went there and they couldn’t find a match.

Have them pull the book out with wheel studs. It took my guy some time to find the right one, I think I left the one I brought in. The one he found was maybe 1/8” shorter than the original. They did have to order it, only took a day or two.

Jack

 

[simp5782]

Have them pull the book out with wheel studs. It took my guy some time to find the right one, I think I left the one I brought in. The one he found was maybe 1/8” shorter than the original. They did have to order it, only took a day or two.

Jack

Those are wheel studs that are at napa. Not beadlock studs on the wheel. Only certain distributors sell those

Maybe a moderator can adjust the title to be more specific. FMTV wheel beadlock studs would probably be accurate as that is what the OP was looking for. Not studs for the truck

 

[jack/ny]

Those are wheel studs that are at napa. Not beadlock studs on the wheel. Only certain distributors sell those

Maybe a moderator can adjust the title to be more specific. FMTV wheel beadlock studs would probably be accurate as that is what the OP was looking for. Not studs for the truck

I got the beadlock studs at NAPA.

 

[jack/ny]

I got the beadlock studs at NAPA.

A little late, I found the part # for the two piece wheel Bolt. This is what I used to replace one bolt on the wheel, I’m not sure if it’s actually a bead lock stud. NAPA # 641-3141

Jack

 

[JD4044M]

These might work if you grind the needed flat spots? Wheel Studs

 

[Plasa]

OK, I will try and let you know!

Thanks!
Christian

These might work if you grind the needed flat spots? Wheel Studs

 

[gringeltaube]

These might work if you grind the needed flat spots? Wheel Studs

That link shows 7/16" studs. But we need 5/8"...


NAPA # 641-3141 (Post 28 ) is equivalent to GM #15725051. Some dimensions and vehicle application can be seen here...
Those are not the same as the stock FMTV wheel studs, but may eventually fit - after some grinding. (I'm not sure; never done it, myself...)

 

[charlesmann]

Seems questionable at best. With a childish comment like that, it's amazing that they've even dropped...

I was going to offer you a couple studs out of a bent wheel I had....AND enough new nuts to do all those wheels, since I have about 1200 new ones. AND they would've been all for the cost of shipping. But hey, you can spend your money now fool. Maybe Memphis can find you a towbar so you can drag that foot out of your mouth. D@mn youngin's and their mouths...

View attachment 777993

I know this is kind of an old thread. But do you by chance have a couple studs and nuts left? i looked at what my local napa offered, and the stud and nut didn't seem to match with what i had in my hand.