Front Axle Shaft Dirt and Oil Slinger

[nattieleather]

Hello all,
I'm looking for the part number for the above mentioned outer axle shaft seal. This is pressed onto the shaft and seals up against the steering knuckle. I buggered mine all to heck and need a replacement. Anyone have a part number or where to get them? Thanks.

 

[gringeltaube]

I guess it's the seal #5 you are referring to?



Part number 4036431, NSN 5330-01-033-3167

 

[nattieleather]

I guess it's the seal #5 you are referring to?

View attachment 885127

Part number 4036431, NSN 5330-01-033-3167

Nope that's the inner seal that goes inside the steering knuckle. The one I'm looking for goes outside the knuckle and is on the axle shaft. It is sort of hat shaped.

 

[nattieleather]

Nope that's the inner seal that goes inside the steering knuckle. The one I'm looking for goes outside the knuckle and is on the axle shaft. It is sort of hat shaped.

Okay I misspoke. That looks like it's the right part number. Now just need to find a supplier who has it. Thanks.

 

[nattieleather]

Just a follow up. Yes that is the correct part number for the slinger. Thank you @gringeltaube for providing that. Now it seems that this is the unicorn of mid to late 70's Dodge parts. I've checked all the auto part chains and I've checked Napa...my local Napa is useless they can't find a prat for anything older than 1985 and even then that's a stretch for them. I've crawled the web and even folks that say they have the part don't have any in stock.

The manual says to replace the part when servicing or replacing the bearings and even shows installing a new slinger with the correct tool, but it seems that nobody has this part. I've been able to carefully hammer mine back into shape that I can use it, but would still love to replace it.

If anyone knows of a supplier that has it or even if the part was reused and given a new part number on a newer axle please let me know so that I can get a new one.

Thanks all.

 

[NDT]

Isn’t that part of the wheel bearing comprehensive kit? I think those kits are floating around still.

 

[enfieldgene]

hi NDT, I think I bought the seal cup from Torque King 4x4. Part # QU40072. they were expensive but I think they were about $80.00 a pair.