1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
That'd be great Jeff thanks! Are you needing the 211 bed? How's the projects coming?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
G749 Trucks hard to come by
- Thread starter 1944mb
- Start date
- 1,890
- 1,480
- 113
- Location
- Laramie County, Wyoming
I don't think I'll need either one. Between my two trucks I should be okay for sheet metal. Haven't done anything to them all winter cause it was too cold. If anyone is looking for a bed I can point them in the right direction.
- 3,912
- 2,724
- 83
- Location
- Edmonton, Canada
G749 Transmissions
Are we still itchin' with the fishin' ambition for a transmission mission? I think I'd bring down the one with the bellhousing so it's heavier and more difficult to slide into your truck. We know that they're take-outs, won't know the condition until you take it apart.
Are we still itchin' with the fishin' ambition for a transmission mission? I think I'd bring down the one with the bellhousing so it's heavier and more difficult to slide into your truck. We know that they're take-outs, won't know the condition until you take it apart.
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
Yes sir,
When would work well for you. Just need to get a few things in order first. Life was easier when you didn't need a passport to go to Canada! Shouldn't take too long, just need to renew it-you know just pay money!! Either of the beasts would be awesome! I'm sure they are light like a Honda Civic trannny right?Also got those soft top pieces from 08.
When would work well for you. Just need to get a few things in order first. Life was easier when you didn't need a passport to go to Canada! Shouldn't take too long, just need to renew it-you know just pay money!! Either of the beasts would be awesome! I'm sure they are light like a Honda Civic trannny right?Also got those soft top pieces from 08.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
How soon are you guys talking about meeting? I might be up visiting 1944mb in July.
- 3,912
- 2,724
- 83
- Location
- Edmonton, Canada
Well then,,,, I may hit Medicine Hat in the next few weeks but there's also an opportunity for me to be in Lethbridge July 1. I could throw the brake parts in the box and thin out the stock a little.
Still trying to talk you kids into stamping a passport and coming North......but a meeting in Montana sounds fun too. Let's see what's best for the 1944 family......and did you know that Canada holds 60% of the World's fresh water resources in the form of crystal clear lakes, rivers and streams!
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
Let me know what parts you need and I will see what I have and what I can fit in the Expedition.
- 250
- 29
- 28
- Location
- Salmon, Idaho
Would like to meet with you guys in July if possible.
USMC 00-08
Well-known member
- 1,183
- 180
- 63
- Location
- Skiatook, OK
That would be really neat if we could all meet up.
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
Definitely would be game.
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
Well finally made it over to inspect the 135 and not much left other than a rolling chassis. I'm thinking I'd like to take that 207 with the ruined frame and take two trucks to make one. Gas tank on this was in great shape. The motor turned freely and drive train was in fairly complete condition. Missing the flywheel inspection cover.
Also spied a pretty nice m105a2 trailer in the yard with a DoD of January 1956 and the remnants of a cckw or 1 1/2t chevy. Excited to finally have the snow gone and start making some progress-well snow gone for now anyhowAttachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Talk about your redneck engineering, the plywood cab on that rig is a real hoot. 
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
Haha, yeah maybe they were feeling that a metal cab was silly and out dated-they're bringing in a new fashion-the woodys again!! Hasn't quite caught on yetTalk about your redneck engineering, the plywood cab on that rig is a real hoot.
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
Finally carved out some free time to get an engine and tranny pulled. It amazes me the nice design of these trucks!
Attachments
- 3,912
- 2,724
- 83
- Location
- Edmonton, Canada
302 GMC removal
That gives me a whole bunch of confidence that we're using the right machine as an engine hoist. The front tires on the skid-steer aren't even working. The fork looks real handy too and we can use it to cook hotdogs after the work is done. Great job! Really got to feel for the guys that use an engine hoist to do a pull.
Thought I had a cross-over pipe for you but it was rotten too so I'll keep looking. Do you have pieces laying around for a pattern if I can't find any decent parts?
That gives me a whole bunch of confidence that we're using the right machine as an engine hoist. The front tires on the skid-steer aren't even working. The fork looks real handy too and we can use it to cook hotdogs after the work is done. Great job! Really got to feel for the guys that use an engine hoist to do a pull.
Thought I had a cross-over pipe for you but it was rotten too so I'll keep looking. Do you have pieces laying around for a pattern if I can't find any decent parts?
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
I cant imagine using a cherry picker-the skid steer is stable enough to be able to maneuver a little bit in the process. It would seem that if a person wouldnt be able to use the standard engine hoist as this setup is fairly heavy....I'd opt for a diesel rated hoist if I was to go that way. And yes, I'm too cheap to buy pallet forks for mine, so I just use the hay spear.
When we went to visit 08 he gave me a spare cross over pipe as a pattern. I have a good pipe coming off the manifold. I'm missing the stack piece I think...I'll have to go check to be certain. I prefer the longer stack like what goose has anyhow
When we went to visit 08 he gave me a spare cross over pipe as a pattern. I have a good pipe coming off the manifold. I'm missing the stack piece I think...I'll have to go check to be certain. I prefer the longer stack like what goose has anyhow
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
I was digging through some of my WWII manuals and jeeps stuff and look at what I found. I'll have to read and digest some of it when I get A minute. Also found some info on Clark and warner transmissions
Attachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That's sweet, nice find!
1944mb
Active member
- 419
- 110
- 43
- Location
- Big Timber, MT
Just gonna let everyone know USMC will be up to Montana to visit the week of July 4th. We plan to work on the 211, hopefully find time to recover the m207, and m135. And basically work on the G-749. Anyone is welcome to join us. We have one day when we are going to Yellowstone to play tourist, and one other day that we have stuff going, both of which I can post exact dates. Did not know if would like to come visit and mess with the G-749, tell truck stories or whatever. We are in Big Timber, MT 59011
- 250
- 29
- 28
- Location
- Salmon, Idaho
Let me know what your schedule is, will get the motor home fired up and if all goes well will be up. Need indirections.
Merle