Gearbox needed

[TacticalTruck]

So we got this job to adapt a Husky suspension onto a Meerkat. We got it all done and I put it in first gear to pull it out of the shop and the thing, which we call a Musky, went backwards. Turns out the pinion in the Husky rotates reverse from the Meerkat. I nned to find a drop box that will reverse the direction of the driveshaft. Any ideas?
Jeff

 

[gimpyrobb]

I have a winch drive box that the pto goes in the top turning clockwise and comes out the bottom turning counter-clockwise. Got any of those laying around?

 

[Stretch44875]

Maybe flip the axle? That would reverse the rotation.

Looking at the axle like this, l--0--l , flip right and left.

Dennis

 

[Recovry4x4]

The Profab transfer case folk could build a drop box to rectify this problem but they aren't cheap.

 

[Rocco]

What is that thing??

 

[TacticalTruck]

Like I said, we call it a Musky, half Meerkat-half Husky:
http://www.olive-drab.com/idphoto/id_photos_mrap_meerkat.php

I thought about flipping the axle but the perches and other things eliminated that.
Gimpy-are you speaking of the wrecker power divider? What's the application?
Kenny, got a link? this one? http://www.profabmachineinc.com/
Thanks guys
Jeff

 

[gimpyrobb]

No, I stripped it off a civy winch truck. I will go over to my buddy's shop and see if it is still in the pile I stripped off the truck, maybe post some pics.

 

[TacticalTruck]

Upon further inspection, I think I can flip the chunk. It is a third member type. I just gotta figure out the plantaries.
Jeff