• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Geared Hub Check Procedure

Stonewall

Member
191
2
18
Location
Peoria, IL
Other than checking for leaks and fluid level, that is pretty much it. There is a special socket that you use to tighten the nut on the spindle. It would be a good idea to get one of those so that you can torque the nut correctly. Once you get in there, it is not a bad idea to replace the seals, they are pretty cheap. The original spindle nut, just had 1 tab that locked it in place. If you have that style, you need to replace it. If you have the 2 tab version as shown in the video, you just need to make sure tabs are in good condition, as shown in video. There are also other aftermarket spindle nuts you can use. A company called bluehummer has a locking spindle nut that others on this site have used and really like. Make sure to use thread locker on the items it is called for in the tech manual.
 

Wire Fox

Well-known member
1,252
161
63
Location
Indianapolis, Indiana
Everything I read says to always replace that tabbed lock washer. Generally anything you have to bend to fit must be replaced every time. The last thing you want is those tabs being over-fatigued, slipping, and your wheel coming off.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks