Generator trailer

[Dog Breath]

what model, single axle trailers were used for mep003a type generators. They have a canopy and runners to mount genny

 

[Evil Dr. Porkchop]

M116a2 was probably the most common for that.

 

[Dog Breath]

Ok thankyou

 

[SCSG-G4]

116 is good for a single generator, the M103 type with a longer bed was used for the 'power unit' (IE 2 generators with the switch between them and the load).

 

[Guyfang]

Are you wanting to know about OLD trailers, or trailers with two gen sets? An M116 is kinda new. There were older trailers that were used.

 

[Dog Breath]

I believe the m103 is the trailer I was looking for.

 

[glcaines]

I got an M116A2 trailer with my MEP003A. It has been a fantastic trailer. It pulls well and is light enough to maneuver by hand on level ground such as concrete, which makes hooking it up easy. Make sure you have the rear leg as you don't want it flipping over backwards. I also like the surge brakes, which work quite well. No problem pulling behind a pickup truck. It also has a very good cover that rolls up on the sides.

 

[Dog Breath]

I am buying a package deal and was trying to identify the trailer that is part of the deal. It has 2 mep003a gens One between the wheels and one that is across the front of the trailer. There was mention of a switch between the two generators. The M103-a3 looks like the one

 

[SCSG-G4]

I am buying a package deal and was trying to identify the trailer that is part of the deal. It has 2 mep003a gens One between the wheels and one that is across the front of the trailer. There was mention of a switch between the two generators. The M103-a3 looks like the one

M103 with a longer bed (10 ft instead of 9 ft). I've owned more than one, the one I'm keeping is be being converted into a bunk trailer.