Tres
New member
- 7
- 1
- 3
- Location
- San Antonio, Texas
Has anyone run into this. My controller is not wired like the TM shows.
If you look you will see that there are two black wires together and the yellow is by its self.
The TM clearly shows that the black and yellow are together and the one single black is next to them.
So what gives here. Could it be someone changed the wiring on the controller or is the TM wrong?
If you look you will see that there are two black wires together and the yellow is by its self.
The TM clearly shows that the black and yellow are together and the one single black is next to them.
So what gives here. Could it be someone changed the wiring on the controller or is the TM wrong?