I've got an m1009 that I bought 6 months ago and have slowly been putting right The last thing still bugging me is the glow plug module/controller card. I have to hold the box it at just the right angle when I turn the key to get the relay to click and it can take me 5-10 tries at different angles to get it to work. Everything else works correctly, the wait light comes on, temp sensor works fine when it's warm, etc.
So I could just get a new GP control card but I'm not sure whether the problem is a bad card or a faulty connection with the blue wire in the harness. I was wondering if it might be possible to borrow a known working card for an hour or two from someone in central NC? I'm in Cedar Grove so anywhere from Burlington to RDU would be good. I can leave some collateral or cash with you while I have it. Ideally I could just drive the truck over and pop it in but then it'll be warm and there will be no way to test it. So I'll probably need to bring the card home, test the truck, and then bring it back over.
If anyone could help me out it would be greatly appreciated. If anyone can help me diagnose my symptoms on here that would be even better.
Thanks!!
So I could just get a new GP control card but I'm not sure whether the problem is a bad card or a faulty connection with the blue wire in the harness. I was wondering if it might be possible to borrow a known working card for an hour or two from someone in central NC? I'm in Cedar Grove so anywhere from Burlington to RDU would be good. I can leave some collateral or cash with you while I have it. Ideally I could just drive the truck over and pop it in but then it'll be warm and there will be no way to test it. So I'll probably need to bring the card home, test the truck, and then bring it back over.
If anyone could help me out it would be greatly appreciated. If anyone can help me diagnose my symptoms on here that would be even better.
Thanks!!