steelypip
Active member
- 769
- 68
- 28
- Location
- Charlottesville, VA
Some pics I took. Richard took a bunch as well.
Rob demonstrating that sealing the exhaust system tightly before fording is a good idea, particularly on a piston-ported two stroke (it let water in at the joint between expansion chamber and muffler). For the record: the spring-fed Robinson river is indeed very cold on September 3. The Munga proved itself a perfectly capable off road vehicle in the slick and rough conditions on Sunday. Tuning that carburetor took me back to working on snowmobiles when I was a kid.
And a couple of the 'cast of thousands' picture I don't usually get to take before dinner:
Rob demonstrating that sealing the exhaust system tightly before fording is a good idea, particularly on a piston-ported two stroke (it let water in at the joint between expansion chamber and muffler). For the record: the spring-fed Robinson river is indeed very cold on September 3. The Munga proved itself a perfectly capable off road vehicle in the slick and rough conditions on Sunday. Tuning that carburetor took me back to working on snowmobiles when I was a kid.
And a couple of the 'cast of thousands' picture I don't usually get to take before dinner:
Last edited: