• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Greetings

eric7722

New member
5
3
3
Location
Benton PA
Hello all. A new old member here. I had a M37 a thousand years ago and getting back in with an early 92 H1 produced just prior to the Hummer brand taking over civilian sales. I think its very close to a 998. I have some electrical issues as much of the harness has been chopped up. I am the 4th owner or later. I have been unable to locate a wire diagram. Any help would be appreciated. Ty in advance.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
You can find the info that is available or least a place to start in the TM section of this forum.
It is a sticky about three down from the top.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
This is the biggest one I can load, it is a much later model but that just means there has been allot of additions, all the basic stuff like wire numbers is the same.
There is a better M997 one that I cannot upload.
 

Attachments

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
I will be honest, I have never seen a civi H1, post some pictures, I am curious about the dash, light switches etc. on a pre GM Hummer
 

eric7722

New member
5
3
3
Location
Benton PA
IMG_2314.JPG
This is the biggest one I can load, it is a much later model but that just means there has been allot of additions, all the basic stuff like wire numbers is the same.
There is a better M997 one that I cannot upload.
 

Attachments

eric7722

New member
5
3
3
Location
Benton PA
I miss spoke after looking it over a bit more this am its more hummer than I remembered. It has been living at my buddies house the last several months. I just got it back yesterday and I'm just starting to go thru it. Thank you aal for the great information. I really appreciate it.
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,584
3,495
113
Location
Brooklyn, NY
Hello all. A new old member here. I had a M37 a thousand years ago and getting back in with an early 92 H1 produced just prior to the Hummer brand taking over civilian sales. I think its very close to a 998. I have some electrical issues as much of the harness has been chopped up. I am the 4th owner or later. I have been unable to locate a wire diagram. Any help would be appreciated. Ty in advance.
You need a different websight like "The Hummer Network" H1 forum

 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks