Growler rim/wheel O-ring

[IMP]

Any one know where to get 15 in o rings for the Growler ?
IMP

 

[NDT]

McMaster Carr lists 15” O Rings. You have to measure the width also. Guessing this is for the wheel?

 

[IMP]

Yes it is for the wheel I will look them up
Thank You

 

[Wisky291]

Yes it is for the wheel I will look them up
Thank You

I'm also looking for the o rings... did you ever find out what size you needed? My rims are leaking...Thanks

 

[IMP]

I just went to Ontario Bearing ( 541-889-3622 ) with my old one they checked the size and gave me new ones .
try a local bearing or pump supply house.

 

[Wisky291]

I just went to Ontario Bearing ( 541-889-3622 ) with my old one they checked the size and gave me new ones .
try a local bearing or pump supply house.

Do you know what size? Thanks

 

[IMP]

Do you know what size? Thanks

I do not they just used their part number 2.158

 

[Wisky291]

I do not they just used their part number 2.158

Thank you, I'll try the part number.. Was it expensive?

 

[Wisky291]

I do not they just used their part number 2.158

That wasn't the right part number.. They said it was 4" in diameter.. When I figure it out I'll post it. Thanks

 

[W427]

Some info on our 2-piece wheels that might be helpful here.

 

[Wisky291]

Some info on our 2-piece wheels that might be helpful here.

This was very helpful. Thanks you very much..

 

[Wisky291]

Any one know where to get 15 in o rings for the Growler ?
IMP

Yes, from Hutchinson the manufacture of the rim.. Part number is P/N 50021.. Guys name is Bill Barrett.

 

[33duce]

What is the torqe spec for outer ring.
Thanks

 

[slightlychilled]

Yes, from Hutchinson the manufacture of the rim.. Part number is P/N 50021.. Guys name is Bill Barrett.

Did you ever get the real specs on the O ring?