• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Hello from Oklahoma

cavtrooper78

Member
Steel Soldiers Supporter
72
102
18
Location
Oklahoma
So we bought a house 153 miles south of us down by Duncan, Oklahoma. I made the trip to take the loaded down deuce to the new house and it drove great. I do think the generator is going though. If I recall correctly they can be rebuilt, but it’s been more than 12 years since I was in an active motor pool. So I think I may rebuild it this winter. Video later.

IMG_1822.jpeg
 
Last edited:

cavtrooper78

Member
Steel Soldiers Supporter
72
102
18
Location
Oklahoma
So this is what I did with my son today on the Deuce.

1. a cigarette lighter adapter wired to the accessory switch.

2. driver side and passenger side rifle racks.

3. 24V solar trickle charger. Works amazingly well for a $30 solar panel.
 

Attachments

Tracer

Well-known member
Steel Soldiers Supporter
6,618
14,091
113
Location
Hawthorne, NV.
Boyce-Equipment & Eastern Surplus both have the correct front winches, I found mine on E-Bay several years back, so you can also go that route. I like dealing with Boyce they're in Utah, a State over from Nevada. They're good folks & know the M35 trucks inside and out. My wife got beat up sitting in the standard passenger seat, so I installed a driver's seat, and she is happy. [thumbzup]
 

cavtrooper78

Member
Steel Soldiers Supporter
72
102
18
Location
Oklahoma
Boyce-Equipment & Eastern Surplus both have the correct front winches, I found mine on E-Bay several years back, so you can also go that route. I like dealing with Boyce they're in Utah, a State over from Nevada. They're good folks & know the M35 trucks inside and out. My wife got beat up sitting in the standard passenger seat, so I installed a driver's seat, and she is happy. [thumbzup]
I like the old style bench seat on the passenger side since my wife doesn’t ride all the time ibliwkt he flat surface when I fold it down.
I’m going to have to put a pin in the winch until I nail down this alternator/generator thing. The PO must have put a hmmwv one on it.
Also I figured out that i had a parasitic drain from the light switch. I got that fixed and now I’m not having dead batteries in the morning which is a good thing. Not crazy about that 60 amp alternator though.
 

cavtrooper78

Member
Steel Soldiers Supporter
72
102
18
Location
Oklahoma
Take it a step at a time, follow the TMs and it'll come together. Love the LMTV bed, looks like it was made for the M35, very nice. :cool:
Thanks man. I appreciate that. Lately I've been kind of wishing i could change it out for a standard one though. Just to have the original bed.
 

Tracer

Well-known member
Steel Soldiers Supporter
6,618
14,091
113
Location
Hawthorne, NV.
If you go with an original bed (drop side/standard) most of the beds have some damage and rust. My truck came from Fort Irwin in So. Cal. and had very little rust but had some damage that I was able to straighten out. Looked at some good parts trucks in the Southwest. You should be able to find a good bed in your neck of the woods.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks