• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Help ID a part.

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,125
9,384
113
Location
Mason, TN
Can someone please tell me what is suppose to be in the circled are in the photo. This is on a 1998 M1078. Thanks in advance.
Ether start cylinder.

Napa #33118
Lower gasket # 33119

Not really needed in Hawaii though probably
 

Ronmar

Well-known member
3,846
7,475
113
Location
Port angeles wa
No, if the engine was cold enough(below freezing), you have to push a switch on the dash(top row second from left I think) to get it to spray ether into the intake to help very cold starts...
 

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,530
113
Location
Camp Wood/LC, TX
Put your cover back on the air hydraulic unit or rain will enter through the muffler, I learned the hard way.
 

Valley Rock

Big wheeler cat peeler
Steel Soldiers Supporter
445
837
93
Location
Orygun
That's where your nitrous bottle goes .

I recommend stepping up to the more better setup like the one pictured below .
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks