Help needed chicken shield and riser

[Drjduff]

Any help would be surely appreciated. The problem: I need a pintle riser that has four bolts for the chicken shield and is wide enough at top to mate with the mk64 cradle for the m-2.

 

[BLK HMMWV]

what kind of shield do you have ?
is it flat or does it have a bend in it.
Not sure what you mean by wide enough to mate with the MK-64 cradle?
The Mk-64 cradle uses a small pintle.
Your best bet is to try 86humv here on the boards.
Do you already have the M2 adapter for the MK-64 because you will need that also if you don't have it already

 

[Drjduff]

Yes, it does have the bend in it (Shield). I need the small pintle for my systems bu I don’t know of a 50 cradle that has the small pintle male end.

I’m really new to this and don’t know what 86hmv is


Sent from my iPad using Tapatalk

 

[BLK HMMWV]

The MK-64 cradle has a small pintle on it already.
It fits in the UPA (Universal Pintle Adapter)
You are looking for a UPA for a shield (flat rectangular plate on the face) that also has a yoke on the back of it ( adjustable Y shaped piece with a cross bar for the T&E Mechanism )

86 HUMV is a member here on the board who might have what you need

A picture of the parts you have would help.
You sure you have a MK -64 cradle ? and not a MK-23 cradle?

 

[Drjduff]

This is the setup imhavr


Sent from my iPad using Tapatalk

 

[Drjduff]

This is the $600 item that won’t fit because the receiving hole is too small


Sent from my iPad using Tapatalk

 

[BLK HMMWV]

So that's what you have ? or that's what your looking for?
sorry didn't see the last picture.

 

[Drjduff]

Better view


Sent from my iPad using Tapatalk

 

[Drjduff]

This is what I have.


Sent from my iPad using Tapatalk

 

[BLK HMMWV]

Basically you have a MK-23 cradle
I'm not aware of anything that's going to adapt to what you want to do.

 

[BLK HMMWV]

you need a MK-64 cradle with a M2 adapter.
The UPA you have is missing the most important part that allows you to use a T&E mech.

 

[Drjduff]

Thank you. I’m a lawyer. If you need advice, I reciprocate


Sent from my iPad using Tapatalk

 

[BLK HMMWV]

PM me your email address. I'll try and take some pictures of what you need so you can have a better idea of what your looking for.

 

[Drjduff]

squireslaw@gmail.com. How do I find a member 86 HUMV. Sorry, this is my first post


Sent from my iPad using Tapatalk

 

[BLK HMMWV]

The only person who is going to have the pieces your missing off the UPA is 86 humv.
You may have to buy a complete UPA from him if he has one. Sadly it is a common method of de-milling them to separate the back half of the UPA.
The Mk-23 cradle will work on your HMMWV but just not with a shield.
They make 2 different cradles that will work with that style shield and UPA.
A Mk-64 and a Mk-93
The MK-64 requires an adapter to adapt it to the M2
The Mk-93 doesn't
The Mk-93 is buffered as well .

 

[BLK HMMWV]

I'm surprised he hasn't found you yet.
on the top of the page you will see the word MEMBERS
click that scroll down a ways and it will say find member.
Type in 86humv and then I believe it will say something like start a conversation.

 

[BLK HMMWV]

I'm betting he will be along in a few or possibly email you or PM you.
I know he was viewing this thread awhile ago

 

[Drjduff]

Thank you

I'm betting he will be along in a few or possibly email you or PM you.
I know he was viewing this thread awhile ago

 

[Drjduff]

Last question: do you use the tapatalk app? Seems to be more complicated

 

[BLK HMMWV]

no