Help : what is missing?

[DefendersMN]

I just got my M1123. I am new to the 6.5L Diesel and HMMWV's. I can't figure out what has been removed here. Under the hood just in front of the bulkhead. Passenger side of engine. Just to the passenger's side of the air intake to the intake manifold. This black plate with two screw holes is just sitting there with a hose in the middle that is open and runs to the intake manifold. There is also a hose that is just open that runs to a filler cap. I very much appreciate any assistance, and I apologize for my newbie questions.

M


I

 

[NDT]

CDR goes there. Crankcase Depression Regulator.

 

[fpchief]

You are most likely missing your fording valve and sensor cup also. Those along with DWF CDR valve are what gets removed for the demil process prior to auction. DWF CDR is expensive if you buy it new, it has to be the one for the fording kit if you want to make it as it was. The fording valve can be had from the want to buy in SS classifieds, and sensor cup is about $10 from kascar.

 

[papakb]

As stated, CDR Valve

 

[DefendersMN]

Thanks. have the valve on order. I appreciate the help!

 

[Retiredwarhorses]

Thanks. have the valve on order. I appreciate the help!

your Missing the bracket as well....

 

[DefendersMN]

your Missing the bracket as well....

Would the bracket be in this kit? II can't identify from the parts list.

Deep Water FORDING KIT M998 HMMWV Humvee Military Truck GREEN 5705693

HMMWV M998 DEEP WATER FORDING KIT Great for flood or high water situations during hurricanes. Is a must have to ensure the engine of your Humvee is not damaged. From Satisfied Customers: "Great Item. 2nd one purchased. 1st was installed on M998. Used during the Houston Floods from Hurricane...

secoparts.net

 

[Retiredwarhorses]

No, the bracket is just the standard CDR bracket that fits either the standare valve or the fording CDR valve.
call kascar....

 

[DefendersMN]

Ok thanks!


Sent from my iPhone using Tapatalk

 

[HoveringHMMWV]

Part #4 in the attached diagram looks installed in your photo....
- HoveringHMMWV

 

[DefendersMN]

Part #4 in the attached diagram looks installed in your photo....
- HoveringHMMWV

Awesome, thank you!

 

[fpchief]

Question, how much did you pay for the CDR you have on order?

 

[juanprado]

Replace the hoses as it will be much easier now than later.....

 

[DREDnot]

your Missing the bracket as well....

Isn't that the bracket in the third pic?

 

[Ajax MD]

You are most likely missing your fording valve and sensor cup also. Those along with DWF CDR valve are what gets removed for the demil process prior to auction. DWF CDR is expensive if you buy it new, it has to be the one for the fording kit if you want to make it as it was. The fording valve can be had from the want to buy in SS classifieds, and sensor cup is about $10 from kascar.

Ah! I didn't know that removing some DWF components was part of the demil process. All of my DFW components are in place except for that sensor cup and the tall intake stack and exhaust stack. I couldn't for the life of me figure out why these parts were removed. Now I know.

 

[juanprado]

the cup is also available on epay
eBay item number: 222442168610

 

[DREDnot]

We just got an 1123 in and it was missing the CDR valve also. I was wondering about why until this thread popped up. Makes sense now.
They ripped the fording switch out ...which was nice.

 

[HoveringHMMWV]

The demil process seems random and probably depended on how much of a hurry they were in on a Friday afternoon. Mine was missing the extended exhaust and the fording switch looked as if a cutoff wheel had been hastily used. All other components remained.
- HoveringHMMWV

 

[juanprado]

I would love to see the TM or manual that outlines the demill process.

Just crazy stupid since deep water fording components and kits are sold and out there with no problem.......

 

[fpchief]

Ah! I didn't know that removing some DWF components was part of the demil process. All of my DFW components are in place except for that sensor cup and the tall intake stack and exhaust stack. I couldn't for the life of me figure out why these parts were removed. Now I know.

I have not seen them remove the stacks for demil. Must have taken their time with yours!

What sucks is mine had each part they took off, thrown in the back...all smashed. I am retired military I understand the need for some things to be demilled....I do not understand why they chose the fording Kits though.