help window problems

[HASSON1911]

so i have a 68 deuce with a hard top. the other day i noticed there was a gap between the passenger window and the hardtop. upon further inspection he hard top was only held on by 3 out of the 14 bolts that should be there from the last guy who owned it so i replaced all those in hope that it would fix the gap but its still there. is it possible the window got bent out. if so can it be fixed. and has anybody had any problems like this

 

[bullfrog1234]

does your window shake back and forth easy?

 

[HASSON1911]

its got a little play but not too much

 

[Stan]

A picture would help.

 

[doghead]

There are adjustments.

Proper window adjustment is completely covered in TM9-2320-361-20.

Chapter 11, paragraph 6.

 

[HASSON1911]

i will try get a pic up today and also read the tm in that section see if i cant figure something out.

 

[rpollitt01]

Adjustment isnt that dificult...good luck

 

[HASSON1911]

well the last of the bolts went in the cab i tweak with the window. and there is still a little gap. considerably less than what there was to begin with. and now my doors close a lot easier now. ill take this as a victory