Help with mounting locations

[TOM R]

Need to start getting parts off the shelves and on the truck

I need to know the exact location to mount this mk64 storage bracket

 

[juanprado]

Looks like the existing d ring bolt #10 would be where to start. Then align the base parallel to the radio tray and drill away.

 

[TOM R]

Looks like the existing d ring bolt #10 would be where to start. Then align the base parallel to the radio tray and drill away.

thanks, think i need to nut and bolt or is riv nuts ok

 

[TOM R]

Need location for the gunners mount in a m1114

 

[juanprado]

A rivet nut should make it much easier and a one man job.

 

[TOM R]

Looks like the existing d ring bolt #10 would be where to start. Then align the base parallel to the radio tray and drill away.

I don't have that d ring bolt on mine also not under the plywood I looked

 

[juanprado]

I don't have an arnament carrier but a base m998. I think mine has the d-ring. Let me look and if so I can take picture and put a tape on it.

 

[AAVP7]

I don't have that d ring bolt on mine also not under the plywood I looked

Even if you didn´t find the D-ring underneath the plywood, the bolt hole for a big 1/2" bolt should be there. They were on every Humvee I´ve seen so far.

The bolt hole sits where the big fat square aluminum tubing behind the front seats disappears into the tunnel.

 

[TOM R]

Even if you didn´t find the D-ring underneath the plywood, the bolt hole for a big 1/2" bolt should be there. They were on every Humvee I´ve seen so far.

The bolt hole sits where the big fat square aluminum tubing behind the front seats disappears into the tunnel.

Thanks