• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Here's our 1952 XM211. New to the site

Century

New member
13
7
3
Location
Portland Oregon
Your truck looks and sounds great! Welcome to the forum.
Welcome to the site, great looking truck!
Welcome from Kentucky. Beautiful truck you have there. Thanks for sharing.
Welcome Aboard :-D
Find a bunk, stow your gear, and prepare to get underway :driver:

That's one sweet lookin' truck you've got there!
Looks great!


Sent from my iPhone using Tapatalk
Very nice truck. Welcome aboard.
Thank you everyone, very kind. We are able to struggle through most of the upkeep ourselves, but it's nice to know if we come to a road block on something, there are some other owners we can bounce ideas off of.
 

marchplumber

Well-known member
Steel Soldiers Supporter
3,801
2,833
113
Location
Peoria, Illinois
Welcome aboard!! I was the proud holder of one of these, needless to say, she went on to a better home. Great having ya here! TONS of knowledge and info here, GREAT people too!! Thanks for the vid and sharing.
 

huskers

New member
5
0
0
Location
Deshler, NE
I have a 1952 as well. Any ideas where I can find a fuel tank and pump? Even if the tank has a hole in it, I could use for pattern to make new one. When I bought this one 30 years ago the tank was taken off. I have the urge to get it so I don't have to use a 5 gallon can!!

Thanks
 

Century

New member
13
7
3
Location
Portland Oregon
I have a 1952 as well. Any ideas where I can find a fuel tank and pump? Even if the tank has a hole in it, I could use for pattern to make new one. When I bought this one 30 years ago the tank was taken off. I have the urge to get it so I don't have to use a 5 gallon can!!
I see there is a 'Parts wanted' and 'Classified' section in here. Might want to try that if you haven't already. Also, may need to get creative, maybe a new gen. deuce gas tank (don't know if it's hard to do/modify), or put a large fuel cell in the cargo box. Lots of room behind the cab!
 

frank8003

In Memorial
In Memorial
6,426
4,985
113
Location
Ft. Lauderdale, Florida
perhaps you need to talk with HIM

fuel tank 2 Gringeltaube.jpg

fuel tank 1 Gringeltaube.jpg

fuel tank 6 Gringeltaube.jpg

fuel tank 7 Gringeltaube.jpg

fuel tank 2 Gringeltaube.jpg

Many states' police forces + MV inspectors freak with fuel tanks in the bed, something about transporting fuel, the SEC, HS, NTSB, BOA, Ralph Nader, and more, I sure I don't remember, I don't know.
Do what is best for You and Yours at your location...
 
Last edited:

Century

New member
13
7
3
Location
Portland Oregon
Many states' police forces + MV inspectors freak with fuel tanks in the bed, something about transporting fuel, the SEC, HS, NTSB, BOA, Ralph Nader, and more, I sure I don't remember, I don't know.
Do what is best for You and Yours at your location...
Just tossing out ideas. I'm sure you could punch holes in any of them. Oregon compared to some other states is pretty lenient on car laws. Especially historical vehicles (outside smog testing). They never/RARELY get 'inspected'. I like those pictures of the gas tank repair! Some people do not have the tank itself, let alone those perfect welding abilities. From a logistical view, way up in the bed would be much safer than hanging of the bottom, right under the cab!
 

huskers

New member
5
0
0
Location
Deshler, NE
Yes I've posted on there but no luck yet and didn't see anything in the for sale either. Thanks though. Mine came with no tank so I don't have anything to use as a pattern. Wouldn't be bad if it weren't for the curved top. Need to get it pretty precise.
 

marchplumber

Well-known member
Steel Soldiers Supporter
3,801
2,833
113
Location
Peoria, Illinois
Yes I've posted on there but no luck yet and didn't see anything in the for sale either. Thanks though. Mine came with no tank so I don't have anything to use as a pattern. Wouldn't be bad if it weren't for the curved top. Need to get it pretty precise.



Get ahold of Plowboy1010 ( think that's the screen name). He might be willing to get ya measurements from Goose, his truck.. Great guy!!
 

Another Ahab

Well-known member
17,999
4,556
113
Location
Alexandria, VA
Beautiful rig!

Welcome from over here in Virginia:

- What made you pick that truck to "play" with (didn't open the vid yet, was that in the vid)?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks