dirtyfingernails
New member
- 778
- 4
- 0
- Location
- Gainesville, FL
Acquired a number of trailers (M116A3) on GL to get these HMMWV rims for my truck. All the tires are pointed in the same direction. I'm assuming they are a directional tire. Three questions:
1. Is the orientation correct in the photo labeled pass?
2. If I break down the rim, can I just flip the tire on the rim and not worry about changing any of the runflat stuff inside (or does that stuff have an orientation also)?
3. Is breaking down the wheel difficult? I've done old Dodge MV combat rims with no problems but they have a tube. BTW, I bought new o-rings--would that be all I need to replace? (okay 4 questions)
Thanks!
1. Is the orientation correct in the photo labeled pass?
2. If I break down the rim, can I just flip the tire on the rim and not worry about changing any of the runflat stuff inside (or does that stuff have an orientation also)?
3. Is breaking down the wheel difficult? I've done old Dodge MV combat rims with no problems but they have a tube. BTW, I bought new o-rings--would that be all I need to replace? (okay 4 questions)
Thanks!
Attachments
-
80.4 KB Views: 82
-
74.5 KB Views: 82