HMMWV Mods and Improvements

[Andyrv6av8r]

Anyone interested in a thread with pictures of mods and improvements that they have made on their trucks? Someone may see something that they like and be able to contact that individual about getting info and fabricating it for their truck. I've had guys ask about a couple that I did and am always looking for other projects too.

 

[TOBASH]

Absolutely. Maybe even it’s own vehicle specific section under restoration and paint forum.

 

[MattNC]

I like the idea. Here's my non-mil spec repaint and mount of a high-jack lift I did recently to kick it off if you want. I've really liked it so far, quiet and lets the tailgate still go down.

 

[MattNC]

Since the picture also captures the XM381 12V trailer wire adapter and the aftermarket hitch I added I can comment on those as well. I've loved the XM381 setup. I have no affiliation with them, paid for it, and don't know anyone there but it was a quality unit with great instructions and I'm very happy with it. The hitch was the older version federal military parts offered. They have since changed it around a bit to make mounting the pintel back in easier and to add a license plate holder. Overall it was very beefy. They claim it (not the humvee) can handle 10,000lb and I believe it as it and the supports are 1/2" plate. The finish was OK and the mounting required 4 arms and ten thumbs plus a pry bar but once on there I have been very happy. Again no affiliation there.

 

[donquijote]

Absolutely. Maybe even it’s own vehicle specific section under restoration and paint forum.

I agree. It should be a sub section with individual posts for each mod, so 100 mods aren't jammed together on one thread.

Sent from my SM-N950U using Tapatalk

 

[osteo16]

Been waiting for a "MODS" section. Nice to be able to look at others work and maybe get some own ideas about projects. Thanks for getting this going....

Ocho

 

[Andyrv6av8r]

Here are a few mods and projects that I have done to my M1045A2. I have been asked details about them in various other threads hence the reason for this one. Anyone interested in anything I've done feel free to contact me. My phone number is in my sig line.

My custom made tire carrier using a well known brand pictures as a "pattern". Works great and cost around $200.

 

[Andyrv6av8r]

NEXT IS MY SWING AWAY JERRY CAN HOLDER.





Next is my custom light bar. Cost about $80.

 

[Andyrv6av8r]

Next are my gas struts for my hood. Same struts that are on my 2002 Toyota Camry. Opens easily with one hand. Costs about $25.

 

[Andyrv6av8r]

Sorry for the duplicate post.

 

[Andyrv6av8r]

Weatherstripping to keep water out of the intake valley. Easy but pretty effective.

 

[BradIXXI]

Has anyone changed their Fuel Pump to Electric from Mechanical?

 

[Andyrv6av8r]

A couple of more improvements I forgot to mention. 3/4 inch rubber mat to cut down on heat and noise. I bought it at Tractor supply; horse stall mat.





Interior LED dome light with adjustable brightness. It's turned on and off with the installed door switches.

 

[Mogman]

Here are a few mods and projects that I have done to my M1045A2. I have been asked details about them in various other threads hence the reason for this one. Anyone interested in anything I've done feel free to contact me. My phone number is in my sig line.

My custom made tire carrier using a well known brand pictures as a "pattern". Works great and cost around $200.

View attachment 798276
View attachment 798277
View attachment 798278

So you used a trailer axle spindle and bearings for the pivot?

 

[Andyrv6av8r]

So you used a trailer axle spindle and bearings for the pivot?

Amazon.com

 

[Mogman]

Amazon.com

Thanks! that is actually what it is with the addition of the machined outer tube!

 

[Gamble]

Here are a few mods and projects that I have done to my M1045A2. I have been asked details about them in various other threads hence the reason for this one. Anyone interested in anything I've done feel free to contact me. My phone number is in my sig line.

My custom made tire carrier using a well known brand pictures as a "pattern". Works great and cost around $200.

View attachment 798276
View attachment 798277
View attachment 798278

What did you do for the antenna hole in the Sponson? It looks completely covered but cant tell from the picture.

Also, does your truck have a body lift or a suspension lift at all?

It looks great.

Thanks

 

[Andyrv6av8r]

It had a cover on it when I bought it. No lift of any kind on it; bone stock. How about some pictures of yours?

 

[Gamble]

It had a cover on it when I bought it. No lift of any kind on it; bone stock. How about some pictures of yours?

Once I finally receive mine from GP I absolutely will.

 

[MattNC]

Wow, great projects Andyrv6av8r!