HMMWV Wheel O-rings Civilian Part Number

[GIJoeCzar]

If I order this:

3/16" x 14.00" ID buna N 70 duro (red) O-ring

... will I get the correct wheel O-ring for the HMMWV A2 12-bolt (13th hole) wheel O-ring p/n 12460338? If the above is correct, does anyone have the exact civilian part number for this O-ring?

I've done my due diligence searching this site, but I don't see anywhere someone confirming that the above information is correct or the civilian p/n for the A2 wheel O-ring.

Thank you.

 

[Mogman]

The only ones I have found that work are the ones from AMG.

Genuine Humvee Parts

Genuine Humvee Parts

genuinehumveeparts.com

 

[GIJoeCzar]

Mogman, Thanks for that reply. Yeah, I went right to AMG first, but they're currently out of stock. Joe

 

[osteo16]

HPG has 408 in stock

 

[GIJoeCzar]

Roger, but still looking for the civilian part number, so I can order direct.

 

[coolboatguy]

I bought 48" of 3/16" oring material and made my own. One dab of superglue and you're done. Just make sure you cut the ends square but even if it's a little off it's still good because it gets squeezed. It's maybe a buck a foot.

 

[Mogman]

I bought 48" of 3/16" oring material and made my own. One dab of superglue and you're done. Just make sure you cut the ends square but even if it's a little off it's still good because it gets squeezed. It's maybe a buck a foot.

I did the same thing with some that were too long only I did not even glue the ends, one out out of five loses about 2-3lb a month, still stable after 6000 miles

 

[simp5782]

Hayes wheels in Akron OH is the direct distributor

Part # X91610

 

[Mainsail]

According the NSN, the reference part numbers are:

12460338 (USATAC)
91610 (HAYES Int)
5331014171043
5331PL0654139
12460338 (AM General)
91610 (HAYES Akron)
RCSK17877 (AM General)
X91610 (HAYES Akron)

CROSS-SECTIONAL HEIGHT 0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
CENTER HOLE DIAMETER 14.420 INCHES MINIMUM AND 14.560 INCHES MAXIMUM
MATT MATERIAL RUBBER
MATERIAL DOCUMENT AND CLASSIFICATION ASTM-D-2000 ASSN STD SINGLE MATERIAL RESPONSE