• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Hose to air intake and random wire ID

Pstyckiewicz

Active member
214
119
43
Location
Massachusetts
I am looking to identify a loose hose near the front differential. I traced it back to where the air filter housing is, but I’m not sure what it hooks up to down near the front diff. In addition I found a green wire that is cut. Not sure if anyone can help me figure out where theses things go. Also I have a few random parts that were in the truck that I don’t know what they are.

thanks,
 

Attachments

  • Like
Reactions: OBX

mgFray

Well-known member
Steel Soldiers Supporter
711
982
93
Location
Southern Minnesota
Below the green in the first picture is the hose for the washer nozzle.. (there should be one on each side in front of the windows).. Other then that, I'm not sure. Sorry.
 

Pstyckiewicz

Active member
214
119
43
Location
Massachusetts
Thanks for the reply’s. It is a USMC truck. I have the black cup, but they cut it up. I was wondering where that would mount to. As for the green wire it looks to be a grounding wire. I’ll have to keep looking for where it might have gone to. It is an M1152A1 so who knows what they were running in this thing.
 

Gcelevator

Well-known member
Steel Soldiers Supporter
493
706
93
Location
Fort Lauderdale, Florida USA
Whatvkind of AC compressor do you have? Does it have a green wife attached or a screew to the body were a connector might attach? Mine has a green wire attached to it not sure if it is the same.
 

Mainsail

Well-known member
Steel Soldiers Supporter
1,502
1,676
113
Location
Puget Sound, WA
My M1165 has the same hose shown in the second picture. The clamp should be holding some sort of plug or valve at the opening of the line. I guessed it might be a pressure relief/check valve arrangement for the fording system.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,931
9,587
113
Location
Papalote, TX
Have you replaced the missing CDR valve? if not you have an open path into your intake, any debris gets in there you will be looking for another engine
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks