• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

How do I remove this talcum powder residue?

progun

Member
245
2
18
Location
Duson, LA
I have a NOS vinyl top. It is coated with white powder. Most of it came off with Simple Green and water but it is stuck where it is caked on in a few spots. Any suggestions? Thanks
 

Scarecrow1

New member
1,355
1
0
Location
Florence , S.C.
It will come off with a little urging from a pressure washer you just have to be careful doing it , Also Gojo and a soft brush should dissolve it and won't hurt the top.
 

Lindsaym151

Member
666
12
18
Location
Eustis,FL.
Just had this conversation with Richard @ RIV RAD!
I just got done doing mine, Laquer thinner and a clean soft white cloth. I stayed away from the clear plastic! used soap & water and then paint thinner using the same method as before. Took only 10 minutes! lay it out flat on a blanket in the shade!
 
Top