How does a M101 bed mount?

[gavan]

I am using a M101 bed for my CJ-10a project and need a little input on how they are mounted to the factory frame. I see there are T holes in the ribs of the bed, are these for carriage bolts? Is there anything between the ribs of the trailer and the frame? Is there just a piece of angle iron that welds to the M101 frame, or is the frame as wide as the bolt holes in the ribs?

I have seen some detailed pictures of how the M105 beds are mounted, but I have come up dry on the M101 mounting pictures.

Thanks! A gratuitous picture of my project to get a visual going!

 

[therealsundance]

I like to look!

 

[jamesfrom180]

GEEZE man just resurrected your old thread and saw this.

 

[gavan]

Thanks for the interest.

I keep this thread a little more up to date

Project: Daily Driver Tug - Pirate4x4.Com Bulletin Board

And some more if you like the CJ-10s

THE Official CJ-10a thread!! - Pirate4x4.Com Bulletin Board

 

[Barrman]

Normal carriage bolts will work on the sides. The front and rear fasten with normal nuts and bolts. Mine did not have a spacer of any kind between the frame and bed. Neither have any others I have looked at.